Atlas Precision - Welcome To Atlas Precision Pro-Magnum Custom Chassis and Components for the Harley-Davidson®, Custom and Chopper Market place Since 1967

ATLAS PRO MAGNUM has engineered and developed a lowered custom built precision WIDE DRIVE chassis for those Harley® enthusiasts who wish to run a big rear tire on your Softail® along with keeping the rear belt drive. The Atlas chassis kit will accept  a 180 X 18 rear tire using a 5.5 rim with stock width belt of 200 tire with a 1 1/8 belt or chain drive. By widening out our swing arm and axel width and moving the motor and transmission to the left we have achieved a great ride with no shifting to the left. The balance point is unaffected as the offset is minimal. Atlas has been doing this in our drag frames for over 38 years.

The basic  Wide Drive kit includes:
Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum Basic WIDE DRIVE Custom Motorcycle CHASSIS STARTER KIT

STARTER KIT INCLUDES Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, your Choice Of Neck Rake & Stretch. Chromed Chrome-Moly Rear Axel Kit.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum Basic WIDE DRIVE Custom Motorcycle CHASSIS Builders KIT

BUILDERS KIT # 2 INCLUDES: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. Chromed Chrome-Moly Rear Axel Kit, Polished Stainless Steel Pivot Axel & Bolt Kit, 2 Front Oil Tank Brackets, Polished Stainless Steel Fork Stops, 8 1/2in Plain Steel Fender Struts, 8 1/2in Contoured Rear Fender

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum Basic WIDE DRIVE Custom Motorcycle Custom Motorcycle CHASSIS CUSTOM KIT

CUSTOM KIT  INCLUDES: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Swingarm Bearings & Cups, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. Chromed Chrome-Moly Rear Axel Kit, Polished Stainless Steel Pivot Axel & Bolt Kit, 2 Front Oil Tank Brackets, Polished Stainless Steel Fork Stops,  81/2in Chrome Steel Fender Struts, 8 1/2in FXST® Bobbed Rear Fender, 8 1/2in, chrome Steel License Bracket, Taillight Kit For Fender Bracket, Chrome Progressive Suspension® Shocks , Chrome Neck Cups, Custom Pyramid Axel Adjusters.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum WIDE DRIVE Custom Motorcycle Custom Motorcycle ROLLING CHASSIS KIT

(P/N 1011) INCLUDES:
Frame, Swingarm,Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. Chromed Neck Cups, Bearings, and Dust Shields, Polished Stainless Steel Engine Case Protector, Stainless Steel Fork Stops, Progressive Suspension Shocks, 4 Shock Bolts, Chrome Pivot Axle & Bolt Kit, Polished Stainless Steel Rock Guard Kit, USA Swingarm Bearings and Clips, Custom Billet Pyramid Axle Adjusters, Chromed Chrome-Moly Rear Axel & Spacer Kit, Atlas 8-1/2 Chrome Steel Fender Struts (Blind Holes), Atlas 8-1/2inContoured Rear Fender (18 Gauge Steel)
5.5 X 18 40 Spoke Chrome Rear Wheel (Laced and Trued) 180 X 55 VB 18 Avon Tire, 19 or 21 Spoked Chrome Front Wheel With Avon Tire and Tube, Wide Glide or Mid Glide Front End with Arlen Ness Polished Trees/Tubes & Dual Disc Sliders, Arlen Ness Fork Stops In Trees, Arlen Ness Headlight, 4 Risers and Handlebars (Drag to Ape), Small Front Fender With Chrome Sides, Front Axle and Chrome Spacers, Performance Machine 4 Piston Polished Rear Caliper and Hanger Kit, 2 Performance Machine 4 Piston Polished Front Calipers, Polished Performance Machine Forward Controls, 3 Polished and Drilled Rotors with Bolt Kits, Atlas Plain Steel Winged Oil Tank and Mounting Brackets, Atlas Standard, Mid, or Shorty Kickstand (Chrome)
Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Forks - Kit price includes front end tubes up to 3 over on length. If you configure your frame such that the neck rake and stretch requires a front end longer than 3 inches over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop.
2.) Handlebars included in this package are your choice. Provide us a part number from the Custom Chrome Catalog or Drag Specialties Fat Book for bars that retail for less than $140.00 and we will supply them as part of this package price. The alternative is to give us an idea of what you are looking for and we will supply the closest thing possible. We will call you if there are any questions regarding bars.
3.) Rear Brake: We will also supply the PM Brake kit required for the mounting style you select. Example - if you set the frame up for a 1989 Up tab mounting style, that is the bracket we will supply with your kit.
4.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc. Chassis Kits Come Unassembled And Are Not Powder Coated

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum 250 WIDE DRIVE Custom Softail Motorcycle CHASSIS KIT

This frame is set up to take a 250 tire on an 8.5 rim (10 wide) with stock 2000 belt and a 70 tooth pulley combination. A shorter belt 130 tooth will be needed if you use a 65 tooth rear pulley. The 250 chassis is set up to take 89 thru 99 Softail® shocks and belt guard. They are also set up to take the pre-2000 Softail® seat mount custom fender struts 89-99  Softail® forward controls Evo® Fat-Bob tank mounts or a custom tank application. Custom brake application is required. The frame utilizes a top mount oil tank such as the Atlas center fill winged plain steel oil tank that is custom fitted to contour with the side plates of the frame. Oil tanks come with top and rear mounting brackets. Several kit packages are available from the basic frame to a complete rolling chassis kit. See the Additional Information links below for full details.
The basic chassis kit  comes with, Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock, ty Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum 250 WIDE DRIVE Custom Motorcycle STARTER KIT

STARTER KIT # 1  INCLUDES: 250 Wide Drive Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. Atlas 1 Chrome Moly Rear Axel & Spacer Kit.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum 250 WIDE DRIVE Custom Motorcycle Softail Frame BUILDER KIT with

 BUILDERS KIT # 2 (P/N 1009)INCLUDES: 250 Wide Drive Frame, Swingarm, Brushed Stainless  Steel Rock Guard & Bolt Kit, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads. Your Choice Of Neck Rake & Stretch.  Atlas 1in Chrome Moly Rear Axel & Spacer Kit, Polished Stainless Steel Pivot Axel & Bolt Kit , Polished Stainless Steel Fork Stops, 11in Plain Steel Fender Struts, 11in Contoured Rear Fender.

Contact Us For A Quote!

See Also:

• Atlas Precision Pro-Magnum 250 WIDE DRIVE Custom Softail Motorcycle Custom KIT for Evolution style American V Twin Motor

CUSTOM KIT # 3  INCLUDES:250 Wide Drive Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. Atlas 1 Chrome Moly Rear Axel & Spacer Kit, Polished Stainless Steel Pivot Axel & Bolt Kit, Polished Stainless Steel Fork Stops, 11in Plain Steel Fender Struts With Blind Holes, 11in Contoured Rear Fender, Atlas Plain Steel Winged Oil Tank With All Mounting Brackets, Atlas 1 Custom Billet Axel Adjusters (C), Chrome Neck Cups & Bearings.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum 250 WIDE DRIVE Custom Motorcycle ROLLING CHASSIS KIT

THE ROLLING CHASSIS KIT (P/N 1012) INCLUDES:

250 Wide Drive Frame, Swingarm, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch.
Chromed Neck Cups, Bearings, and Dust Shields, Polished Stainless Steel Engine Case Protector, Stainless Steel Fork Stops, Progressive Suspension Shocks, 4 Shock Bolts, Chrome Pivot Axle & Bolt Kit, Polished Stainless Steel Rock Guard Kit, USA Swingarm Bearings and Clips, Custom Billet Axle Adjusters (1), Chromed 1 Chrome-Moly Rear Axel & Spacer Kit, Atlas 11 Chrome Steel Fender Struts (Blind Holes), Atlas 11 Contoured Rear Fender (18 Gauge Steel), 8.5 X 18 Spoke Chrome Rear Wheel (Laced and Trued), 250 X 18 Avon Tire, Baker Right Side Drive Transmission With Actuator/Shroud Cover (Chrome), 19 or 21 Spoked Chrome Front Wheel With, Front Avon Tire and Tube, Wide Glide or Mid Glide Front End with Arlen Ness Polished Trees/Tubes & Single Disc Sliders, DNA Chromed Billet Headlight, Atlas Risers and handlebars with dampeners and bolts. Small Front Fender With Chrome Sides, Front Axle and Chrome Spacers, Performance Machine 4 Piston Polished Rear Caliper and Hanger Kit
1 Performance Machine 4 Piston Polished Front Caliper, Polished Performance Machine Forward Controls, 2 Polished and Drilled Rotors with Bolt Kits, Atlas Plain Steel Winged Oil Tank and Mounting Brackets, Atlas Stainless Steel Oil Lines And Fittings For Oil Tank. Atlas Standard, Mid, Shorty Kickstand (Chrome)

Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Forks - Kit price includes front end tubes up to 3 over on length. If you configure your frame such that the neck rake and stretch requires a front end longer than 3 inches over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop.

2.) Handlebars included in this package are your choice. Provide us a part number from the Custom Chrome Catalog or Drag Specialties Fat Book for bars that retail for less than $140.00 and we will supply them as part of this package price. The alternative is to give us an idea of what you are looking for and we will supply the closest thing possible. We will call you if there are any questions regarding bars.

3.) Rear Brake: We will also supply the PM Brake kit required for the mounting style you select. Example - if you set the frame up for a 1989 Up tab mounting style, that is the bracket we will supply with your kit.

4.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum ATLAS ROADRUNNER RIGID Custom Motorcycle CHASSIS

This frame is a stretched version of our rigid frame line that we have been building since 1967. The ATLAS ROADRUNNER chassis comes with any neck rake and stretch for that custom look and is set up for 4 or 5 speed transmission mounts stroker Big Twin® motor clearnance and will accept a 180 tire with stock belt or a 200 tire with Harleys® new 1-1/8 belt or a chain. The Atlas Roadrunner Rigid Chassis  Comes Stock With: Your Choice Of Neck Rake and Stretch, FXST® Pipe Bracket Mounting Bungs, FXST® Oil Tank Rear Mounting plate, Sissybar/Fender Brace Mounting Bungs, FXST® Or Bung Type Anchor Tab.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum ROADRUNNER RIGID Custom Motorcycle CUSTOM KIT

The Atlas Roadrunner Rigid Chassis Custom Kit  Comes With: Your Choice Of Neck Rake and Stretch, FXST® Pipe Bracket Mounting Bungs, FXST® Oil Tank Rear, mounting Plate, Sissybar/Fender Brace Mounting Bungs, FXST® Or Bung Type Anchor Tab, Atlas Front Oil Tank Mounting Brackets (FXST® Tank), Custom Axel Adjusters, Chrome-Moly Rear Axel Kit 3/4in Diameter, Chrome Neck Cups and Bearings, Polished Stainless Steel Fork Stopms, Polished Stainless Steel Engine Case Protector.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum ROADRUNNER & CLASSIC Custom Motorcycle ROLLING CHASSIS

THE ROLLING CHASSIS KIT (P/N 9004) INCLUDES: Frame With Your Choice Of Neck Rake and Stretch, FXST® Pipe Bracket Mounting Bungs, FXST® Oil Tank Rear Mounting Plate, Sissybar/Fender Brace Mounting Bungs, FXST® Or Bung Type Anchor Tab, Atlas Front Oil Tank Mounting Brackets (FXST® Tank), Custom Axel Adjusters, Chrome-Moly Rear Axel Kit 3/4in Diameter, Chrome Neck Cups, Bearings And Dust Shields, Polished Stainless Steel Fork Stops, Polished Stainless Steel Engine Case Protector, Front Axle and Chrome Spacers, Atlas 9 Contoured Rear Fender (18 Gauge Steel), 5.5 X 18 Spoke Chrome Rear Wheel (Laced and Trued), 180 X 18 Rear Avon Tire, 19 or 21 Spoked Chrome Front Wheel With Metzeler or Avon Tire, Front Avon Tire and Tube, Wide Glide or Mid Glide Front End with Arlen Ness Polished Trees/Tubes & Single Disc Sliders, Ness Fork Stops On Trees, Ness Headlight, 4 Risers and handlebars. Small Front Fender With Chrome Sides, Front Axle and Chrome Spacers, Performance Machine 4 Piston Polished Rear Caliper and Universal Hanger Kit With Heim Fitting, 1 Performance Machine 4 Piston Polished Front Caliper, Polished Performance Machine Forward Controls, 2 Polished and Drilled Rotors with Bolt Kits, Atlas Lower Fender Bracket, Atlas Grab Rail or Sissy Bar, Atlas Plain Steel Winged Oil Tank and Mounting Brackets, Atlas Standard, Mid, Shorty Kickstand (Chrome)
Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Forks - Kit price includes front end tubes up to 3in over on length. If you configure your frame such that the neck rake and stretch requires a front end longer than 3 inches over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop.
2.) Handlebars included in this package are your choice. Provide us a part number from the Custom Chrome Catalog or Drag Specialties Fat Book for bars that retail for less than $140.00 and we will supply them as part of this package price. The alternative is to give us an idea of what you are looking for and we will supply the closest thing possible. We will call you if there are any questions regarding bars.
3.) Rear Brake: We will also supply the PM Brake kit required for the mounting style you select. Example - if you set the frame up for a 1989 Up tab mounting style, that is the bracket we will supply with your kit.

4.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum CLASSIC RIGID Custom Motorcycle CHASSIS

This frame is a rigid frame for stock or stroker Big Twins® running a 180 reat tire  with a stock belt or a 200 tire with Harleys® new 1-1/8 belt or a chain. The ATLAS Classis chassis is set up to take the stock FXST® oil tank flatside Evo® tanks any neck rake and stretch Shovel® Pan® or Evo® 4 or 5 speed.
The Atlas Classic Rigid Chassis Comes Stock With: FXST® Pipe Bracket Mounting Bungs, FXST® Oil Tank Rear Mounting Plate, Sissybar/Fender Brace Mounting Bungs
Fender Mounting Bungs At The Seat Crossbar, FXST® or Bung Type Anchor Tab

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum CLASSIC RIGID Custom Motorcycle CUSTOM KIT

The Atlas Classic Rigid Chassis Custom Kit Comes With: Your Choice Of Neck Rake and Stretch, FXST® Pipe Bracket Mounting Bungs, FXST® Oil Tank Rear Mounting Plate, Sissybar/Fender Brace Mounting Bungs, Fender Mounting Bungs At The Seat Crossbar, FXST® or Bung Type Anchor Tab, Atlas Front Oil Tank Mounting Brackets (FXST® Tank), Custom Axel Adjusters, Chrome-Moly Rear Axel Kit 3/4 Diameter, Chrome Neck Cups and Bearings, Polished Stainless Steel Fork Stopms, Polished Stainless Steel Engine Case Protector.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum ROADRUNNER & CLASSIC Custom Motorcycle ROLLING CHASSIS

THE ROLLING CHASSIS KIT (P/N 9004) INCLUDES: Frame With Your Choice Of Neck Rake and Stretch, FXST® Pipe Bracket Mounting Bungs, FXST® Oil Tank Rear Mounting Plate, Sissybar/Fender Brace Mounting Bungs, FXST® Or Bung Type Anchor Tab, Atlas Front Oil Tank Mounting Brackets (FXST® Tank), Custom Axel Adjusters, Chrome-Moly Rear Axel Kit 3/4 Diameter, Chrome Neck Cups, Bearings And Dust Shields, Polished Stainless Steel Fork Stops, Polished Stainless Steel Engine Case Protector, Front Axle and Chrome Spacers, Atlas 9 Contoured Rear Fender (18 Gauge Steel), 5.5 X 18 Spoke Chrome Rear Wheel (Laced and Trued), 180 X 18 Rear Avon Tire, 19 or 21 Spoked Chrome Front Wheel With Metzeler or Avon Tire, Front Avon Tire and Tube, Wide Glide or Mid Glide Front End with Arlen Ness Polished Trees/Tubes & Single Disc Sliders, Ness Fork Stops On Trees, Ness Headlight, 4 Risers and handlebars. Small Front Fender With Chrome Sides, Front Axle and Chrome Spacers, Performance Machine 4 Piston Polished Rear Caliper and Universal Hanger Kit With Heim Fitting, 1 Performance Machine 4 Piston Polished Front Caliper, Polished Performance Machine Forward Controls, 2 Polished and Drilled Rotors with Bolt Kits, Atlas Lower Fender Bracket, Atlas Grab Rail or Sissy Bar, Atlas Plain Steel Winged Oil Tank and Mounting Brackets, Atlas Standard, Mid, Shorty Kickstand (Chrome).
Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Forks - Kit price includes front end tubes up to 3 over on length. If you configure your frame such that the neck rake and stretch requires a front end longer than 3 inches over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop.
2.) Handlebars included in this package are your choice. Provide us a part number from the Custom Chrome Catalog or Drag Specialties Fat Book for bars that retail for less than $140.00 and we will supply them as part of this package price. The alternative is to give us an idea of what you are looking for and we will supply the closest thing possible. We will call you if there are any questions regarding bars.
3.) Rear Brake: We will also supply the PM Brake kit required for the mounting style you select. Example - if you set the frame up for a 1989 Up tab mounting style, that is the bracket we will supply with your kit.
4.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum CLASSIC RIGID Custom Motorcycle CHASSIS

This Big Gun chassis will take up to a 250 tire in the rear with stock rear belt 1-1/2in or 300 tire with chain drive.

Atlas recommends you use the Baker Right Side Drive transmission on this frame which allows the motor/transmission to be centered. In order to run the belt drive you will
need to run a stock transmission plate and 1/2 offset primary spacer ring. This allows  the belt to run closer to the tire and allows more belt to frame clearance. When using
a chain drive setup no offset spacer is required. The frames are set to take a 1in rear axle which is highly recommended for the side of rear tire. It is highly recommended you use the Top Mount Atlas Winged Oil Tank for this chassis. You may run a standard FXST type oil tank however a modification to the right side of  the oil tank will be required for belt clearance.

The Atlas Big Gun 250 Frame Comes Stock With:

1-3/4in Or Custom 2in Neck Stem On Frame, Any Neck Rake and Stretch, Gusset Plate In Neck or Open Pro-Street Neck, Gas Tank Mounts (Your Choice), Exhaust Pipe, Mounting Bungs, Top Motor Mount Plate, Atlas Oil Tank Rear Mounting Plate, Sissy Bar/Fender Brace Mounting Bungs, Fender Mounting Bungs On Seat Cross Tube, Atlas Custom Rear Brake Tab or Bung Type.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum BIG GUN 300 RIGID Custom Motorcycle CHASSIS - Right Side Drive

The Atlas Big Gun 250 Frame Custom Kit Comes With: 1-3/4in Or Custom 2in Neck Stem On Frame, Any Neck Rake and Stretch, Gusset Plate In Neck or Open Pro-Street Neck, Gas Tank Mounts (Your Choice), Exhaust Pipe Mounting Bungs, Top Motor Mount Plate, Atlas Oil Tank Rear Mounting Plate, Sissy Bar/Fender Brace Mounting Bungs
Fender Mounting Bungs On Seat Cross Tube, Atlas Custom Rear Brake Tab or Bung Type, Atlas Top Oil Tank Mounting Brackets, Atlas custom billet axel adjusters 1, (Polished or Chromed), Atlas Chrome Moly Rear Axel & Spacer Kit 1in, Chrome Neck Cups, 1 Timken Bearings, Atlas Polished Stainless Steel Fork Stops, Altas Polished Stainless Steel Engine Case Protector.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum BIG GUN 300 RIGID Custom Motorcycle CHASSIS - Right Side Drive

The Atlas Big Gun 300 Frame Comes Stock With: 1-3/4in Or Custom 2in Neck Stem On Frame, Any Neck Rake and Stretch, Gusset Plate In Neck or Open Pro-Street Neck
Gas Tank Mounts (Your Choice), Exhaust Pipe Mounting Bungs, Top Motor Mount Plate, Atlas Oil Tank Rear Mounting Plate, Sissy Bar/Fender Brace Mounting Bungs, Fender Mounting Bungs On Seat Cross Tube, Atlas Custom Rear Brake Tab or Bung Type

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum BIG GUN Custom Motorcycle ROLLING CHASSIS KIT

THE ATLAS BIG GUN ROLLING CHASSIS KIT (P/N 9005) INCLUDES: 1-3/4 Or Custom 2 Neck Stem On Frame, Any Neck Rake and Stretch, Gusset Plate In Neck or Open Pro-Street Neck, Gas Tank Mounts (Your Choice), Exhaust Pipe Mounting Bungs, Top Motor Mount Plate, Atlas Oil Tank Rear Mounting Plate, Sissy Bar/Fender Brace Mounting Bungs, Fender Mounting Bungs On Seat Cross Tube, Atlas Custom Rear Brake Tab or Bung Type, RC Components 18 X 8.5 Chrome Rear Wheel, Avon 250 X 18 Rear Tire, Atlas 1 Chromed Chrome-Moly Rear Axle and Spacer Kit, RC Components 19 or 21 Front Wheel Assembly, Avon 19 or 21 Front Tire And Tube to Match, RC Components Matching 65 Tooth Rear Pulley, 3 RC Components 11 1/2 Matching Chrome Rotors, Atlas / Russ Wenimont Front Fender (Cobra Style), Atlas / Russ Wenimont 10 1/2 Stubby Rear Fender, Atlas Lower Fender Bracket, Baker Polished Right Side Drive Transmission with Cover, Stock Transmission Plate, BDL Transmission Pulley, Atlas Plain Winged Custom Oil Tank (Steel) With Mounts, D&D Fat Katz Stretch Gas Tank With Flush Cap, Atlas Drag Bars and Mounting Kit
Cerani Front End Inverted Forks (Chromed, Dual Disc), Cerani Internal Fork Stops (Chromed), Internal Fork Stop Kit W/Cups & Bearings, Polished. Chrome Billet Headlight
Polished Performance Machine Contoured Forward Controls, Performance Machine 4 Piston Polished Rear Caliper, 2 Performance Machine 4 Piston Polished Front Calipers, Atlas Custom Rear Caliper Hanger (Chromed), Atlas 1 Chrome Billet Axle Adjusters. Atlas Standard, Mid, Shorty Kickstand (Chrome)

Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Wheels, Rotors, Pulley: Your Selection Of RC Component Wheels, Rotors, and Pulleys Can Be Viewed Here. You will need to know which setup you desire when you Click to Configure  your rolling chassis.
2.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake and stretch.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum TWIN CAM B 200 Custom Motorcycle CHASSIS KIT

This frame is not a stock replacement frame for the Twin Cam B® motor and transmission but in fact is a fully custom chassis kit. The frame is set up to take a 200 tire on a 6 rim (8 wide) with stock 2000 Softail® belt and 70 tooth rear pulley combination. A shorter belt (130 tooth) will be needed if you use a 65 tooth rear pulley. Atlas will supply all B Softail® frames the front/rear motor/tranny mounting bolts washers spacers and nuts plain steel or as an option we also offer the same combination is chrome for an additional charge. The chassis is setup to take 2000 Softail shocks and belt drive. They are also set up to take 89-99 or 2000 Up Softail rear caliper and hanger kit 89-99 Softail seat seat custom fender struts your choice of 89-99 or 2000 up forward controls and Evo Fat Bob tank mounts or custom tank application. The coil needs to be mounted on the top motor mount Dyna® style. The frame utilizes a top mount oil tank such as the Atlas center fill steel winged oil tank (plain or chromed) that is custom fitted to contour with the side plates of the frame. Oil tanks come with top and rear mounting brackets. Several kit packages are available from the basic frame to a complete rolling chassis kit. See the Additional Information links below for full details. The basic  chassis kit comes with: Twin Cam B® 200 Tire Wide Drive Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Urethane Swingarm Bumper Pads, Front And Rear Motor/Tranny Bolts, Washers, Spacers and Nuts in Plain Steel, Your Choice Of Neck Rake & Stretch.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum TWIN CAM B 200 Custom Motorcycle FRAME ONLY

See Also:

• ATLAS Pro Magnum TWIN CAM B 200 Custom Motorcycle STARTER KIT

STARTER KIT # 1 INCLUDES: Twin Cam B® Wide Drive Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Aluminum Top Motor Mount Plate, Urethane Swingarm Bumper Pads, Front And Rear Motor/Tranny Bolts, Washers, Spacers and Nuts in Plain Steel, Your Choice Of Neck Rake & Stretch. Chromed Chrome-Moly Rear Axle & Spacer

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum TWIN CAM B 200 Custom Motorcycle BUILDERS KIT

BUILDERS KIT # 2 INCLUDES: Twin Cam B® 200 Tire Wide Drive Frame, Swingarm. Brushed Stainless Steel Rock Guard & Bolt Kit, Aluminum Top Motor Mount Plate,
Urethane Swingarm Bumper Pads, Chromed Front And Rear Motor/Tranny Bolts, Washers, Spacers and Nuts, Your Choice Of Neck Rake & Stretch. Chromed Chrome-Moly Rear Axle & Spacer, Atlas Plain Steel Winged Oil Tank and Mounting Brackets, Chrome Axle Adjusters, Polished Stainless Steel Fork Stops, 9in Plain Steel Fender Struts For 200 Tire Kit, 9in Contoured Rear Fender For 200 Tire Kit.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum TWIN CAM B 200 Custom Motorcycle CUSTOM KIT

Twin Cam B® Wide Drive Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Aluminum Top Motor Mount Plate, Urethane Swingarm Bumper Pads, Chromed Front And Rear Motor/Tranny Bolts, Washers, Spacers and Nuts, Your Choice Of Neck Rake & Stretch. Chromed Chrome-Moly Rear Axel & Spacer, Atlas Stainless Steel Winged Oil Tank and Mounting Brackets, Polished Stainless Steel Fork Stops, 9in Chrome Steel Fender Struts, 9in FXST® Bob-Tailed Fender For, 9in Chrome Steel Licence Plate Bracket, Taillight Kit for Fender Bracket, Atlas Custom Billet Axle Adjusters (C), Chrome Neck Cups And Bearings.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum TWIN CAM B 200 Custom Motorcycle ROLLING CHASSIS KIT

THE 200 ROLLING CHASSIS KIT (P/N 2010) INCLUDES: Twin Cam B® 200 Tire Wide Drive Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Urethane, Swingarm Bumper Pads, Front And Rear Motor/Tranny Bolts, Washers, Spacers and Nuts in Chrome Steel, Your Choice Of Neck Rake & Stretch. Chromed Neck Cups, Bearings, and Dust Shields, Stainless Steel Fork Stops, 2000 Progressive Suspension Shocks, 2 Shock Bolts, Chrome Pivot Axle & Bolt Kit, Polished Stainless Steel Rock Guard Kit, USA Swingarm Bearings and Clips, Custom Billet Axle Adjusters, Chromed Chrome-Moly Rear Axel & Spacer Kit, Atlas 9in Chrome Steel Fender Struts (Blind Holes), Atlas 9in Contoured Rear Fender (18 Gauge Steel), 5.5 X 18 Spoke Chrome Rear Wheel (Laced and Trued), 180 X 55 VB 18 Avon Tire, 19 or 21 Spoked Chrome Front Wheel With Avon Tire and Tube, Wide Glide or Mid Glide Front End with Arlen Ness Polished Trees/Tubes & Single Disc Sliders, DNA Chromed Billet Headlight, 4 Risers and Handlebars (Drag to Ape), Small Front Fender With Chrome Sides, Front Axle and Chrome Spacers, Performance Machine 4 Piston Polished Rear Caliper and Hanger Kit, Performance Machine 4 Piston Polished Front Caliper (Qty 1), Polished Performance Machine Forward Controls, 2 Polished and Drilled Rotors with Bolt Kits, Atlas Plain Steel Winged Oil Tank and Mounting Brackets, Atlas Stainless Steel Oil Lines & Fittings, Chrome Front and Rear Engine / Tranny Mounting Hardware, Atlas Standard, Mid, or Shorty Kickstand (Chrome).
Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Forks - Kit price includes front end tubes up to 3 over on length. If you configure your frame such that the neck rake and stretch requires a front end longer than 3 inches over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop.
2.) Handlebars included in this package are your choice. Provide us a part number from the Custom Chrome Catalog or Drag Specialties Fat Book for bars that retail for less than $140.00 and we will supply them as part of this package price. The alternative is to give us an idea of what you are looking for and we will supply the closest thing possible. We will call you if there are any questions regarding bars.
3.) Rear Brake: We will supply the PM Brake kit required for the mounting style you select. Example - if you set the frame up for a 1989 Up tab mounting style, that is the bracket we will supply with your kit.
4.) Forward Controls: We will also supply the PM Forward Controls required for the mounting style you select. Example - if you set the frame up for a 1989 Up mounting style, those are the controls we will supply with your kit.
5.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.

Contact Us For A Quote!
Chassis Kits Come Unassembled And Are Not Powder Coated

See Also:

• ATLAS Pro Magnum TWIN CAM B 250 RSD Custom Motorcycle CHASSIS KIT

This frame is set up to take a 250 tire on an 8.5 rim with the stock 2000 Softail® belt and 70 tooth pulley combination. A shorter belt 130 tooth will be needed if you use a 65 tooth rear pulley. Atlas will supply with all of our 250 B Softail® Frames the front and rear motor/tranny mounting bolts washers spacers and nuts in plain steel or as an option we also offer the same combination in chrome for an additional charge. This 250 chassis is set up to take 2000 Softail shocks and belt drive universal caliper and hanger kit or custom brake system pre 2000 Softail® seat custom fender struts 89-99 or 2000 Up Softail forward controls Evo® Fat Bob® mounts or custom gas tank application. The coil needs to be mounted on the top motor mount Dyna® style. The frame utilizes a top mount oil tank such as the Atlas center fill plain steel winged oil tank that is custom fitted to the contours of the side plates on the frame. The oil tank comes with top and rear mounting hardware. This frame also requires the use of a Right Side Drive transmission available from Baker Drivetrain. Several kit packages are available from the basic frame to a complete rolling chassis kit. See the Additional Information links below for full details. The basic chassis kit comes with: Twin Cam B 250 Tire Wide Drive RSD Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Urethane Swingarm Bumper Pads, Front And Rear Motor/Tranny Bolts, Washers, Spacers and Nuts in Plain Steel, Your Choice Of Neck Rake & Stretch.

Contact Us For A Quote!
 

See Also:

• ATLAS Pro Magnum TWIN CAM B 250 RSD Custom Motorcycle STARTER KIT

STARTER KIT # 1 INCLUDES: Twin Cam B® 250 Tire Wide Drive RSD Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Aluminum Top Motor Mount Plate, Urethane Swingarm Bumper Pads, Front And Rear Motor/Tranny Bolts, Washers, Spacers and Nuts in Plain Steel, Your Choice Of Neck Rake & Stretch. Chromed Chrome-Moly Rear Axel & Spacer.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum TWIN CAM B 250 RSD Custom Motorcycle BUILDER KIT

BUILDERS KIT # 2  INCLUDES: Twin Cam B® 250 Tire Wide Drive RSD Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Aluminum Top Motor Mount plate, Urethane Swingarm Bumper Pads, Front And Rear Motor/Tranny Bolts, Washers, Spacers and Nuts in Plain Steel, Your Choice Of Neck Rake & Stretch., Chromed 1 Chrome-Moly Rear Axel & Spacer, Atlas Plain Steel Winged Oil Tank and Mounting Brackets, Chrome 1 Axle Adjusters, Polished Stainless Steel Fork Stops, 11 Plain Steel Fender Struts, 11 Contoured Rear Fender.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum TWIN CAM B 250 RSD Custom Motorcycle CUSTOM KIT

CUSTOM KIT # 3  INCLUDES: Twin Cam B® 250 Tire Wide Drive RSD Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Aluminum Top Motor Mount Plate, Urethane Swingarm Bumper Pads, Chromed Front And Rear Motor/Tranny Bolts, Washers, Spacers and Nuts, Your Choice Of Neck Rake & Stretch. Chromed 1 Chrome-Moly Rear Axel & Spacer, Atlas Plain Steel Winged Oil Tank and Mounting Brackets, Chrome 1 Axle Adjusters, Polished Stainless Steel Fork Stops, 11in Plain Steel Fender Struts, 11in Contoured Rear Fender, Swingarm Bearings and Clips.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum TWIN CAM B 250 RSD Custom Motorcycle ROLLING CHASSIS KIT

THE 250 ROLLING CHASSIS KIT (P/N 2011) INCLUDES: Twin Cam B® 250 Tire Wide Drive Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Urethane Swingarm Bumper Pads, Front And Rear Motor/Tranny Bolts, Washers, Spacers and Nuts in Plain or Chrome Steel, Your Choice Of Neck Rake & Stretch. Chromed Neck Cups, Bearings, and Dust Shields, Stainless Steel Fork Stops, Progressive Suspension Shocks, 2 Shock Bolts, Chrome Pivot Axle & Bolt Kit, Polished Stainless Steel, Rock Guard Kit, USA Swingarm Bearings and Clips, Custom Billet 1 Pyramid Axle Adjusters, Chromed Chrome-Moly Rear Axel & Spacer Kit, Atlas 11 Chrome Steel Rear Fender, Blind Holes, Atlas 11 Contoured Rear Fender (18 Gauge Steel), 8.5 X 18 Spoke Chrome Rear Wheel (Laced and Trued), 250 X 18 Avon Tire, 19 or 21 Spoked Chrome Front Wheel With Avon Tire and Tube, Baker Right Side Drive Transmission With Chrome Actuator / Shroud. Wide Glide or Mid Glide Front End with Arlen Ness Polished Trees/Tubes & Single Disc Sliders, Arlen Ness Fork Stops In Trees, DNA Billet Headlight, Atlas Risers and Handlebars With Dampeners and Bolts, Small Front Fender With Chrome Sides, Front Axle and Chrome Spacers, Performance Machine 4 Piston Polished Rear Caliper and Custom Atlas Hanger Kit, 1 Performance Machine 4 Piston Polished Front Calipers, Polished Performance Machine Forward Controls, 2 Polished and Drilled Rotors with Bolt Kits, Atlas Plain Steel Winged Oil Tank and, Mounting Brackets, Atlas Stainless Steel Oil Lines and Fitting For Oil Tank, Chromed Engine / Transmission Mounting Hardware, Atlas Standard, Mid, or Shorty Kickstand (Chrome).
Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Forks - Kit price includes front end tubes up to 3 over on length. If you configure your frame such that the neck rake and stretch requires a front end longer than 3 inches over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop.
2.) Handlebars included in this package are your choice. Provide us a part number from the Custom Chrome Catalog or Drag Specialties Fat Book for bars that retail for less than $140.00 and we will supply them as part of this package price. The alternative is to give us an idea of what you are looking for and we will supply the closest thing possible. We will call you if there are any questions regarding bars.
3.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.
Chassis Kits Come Unassembled And Are Not Powder Coated
Contact Us For A Quote!

See Also:

• ATLAS Pro ATLAS Pro Magnum TWIN CAM B 200 Tire RIGID Custom Motorcycle CHASSIS KIT for use with a Harley-Davidson Twin Cam B Engine

This frame is available in two configurations. The 200 tire version is set up to take a 200 mm wide tire on a 6 rim with stock 2000 rear belt and 70 tooth pulley. A shorter belt 130 tooth will be needed if you use a 65 tooth rear pulley.
The 250 version of this chassis requires the use of a Right Side Drive Transmission. Atlas will supply with all our B rigid chassis the front/rear motor/transmission mounting bolts washers spavers and nuts in plain steel as a option we also offer the same combination in chrome for an extra charge. This chassis is set up to run Evo® Fat Bob tank mounts or custom 1 piece tank application. It is also setup for use with Softail style seat mounts pre-2000 Softail® rear caliper and hanger kit or 2000 caliper and hanger kit and pre-2000 or 2000-up Big Twin® forward controls. The coil needs to be mounted on the top motor mount Dyna® style. The oil tank is pre-2000 Softail® with top mounting bungs. Atlas recommends the winged oil tank to hide the rear mounting bracket. The chassis can be set up for pre-2000 Softail belt guard or chain guard or no guard mounts. The Atlas Rigid Twin Cam B® 200 Tire Chassis  Comes Stock With: Choice Of Gas Tank Mounts, Pipe Mounting Bracket Bungs, Oil Tank Mounting Bungs, Sissy bar/Fender Brace Mounting Bungs, Fender Mounting Bungs At Sear Cross Tube, Plain Front/Rear - Motor Trans Mounting Nuts, Bolts, Washers and Spacers, Bung Type Brake Anchor, 1-3/4in Neck Stem or Custom 2in Neck Stem, Your Choice Of Neck Rake and Frame Stretch.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum TWIN CAM B 250 RSD RIGID Custom Motorcycle CHASSIS KIT

The Atlas Rigid Twin Cam B® 250 Tire Chassis  Comes Stock With: Choice Of Gas Tank Mounts, Pipe Mounting Bracket Bungs, Oil Tank Mounting Bungs, Sissy bar/Fender Brace Mounting Bungs, Fender Mounting Bungs At Sear Cross Tube, Plain Front/Rear - Motor Trans Mounting Nuts, Bolts, Washers and Spacers, Bung Type Brake Anchor, 1-3/4 Neck Stem or Custom 2 Neck Stem, Your Choice Of Neck Rake and Frame Stretch.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum TWIN CAM B RIGID 200 Custom Motorcycle CUSTOM KIT

The Atlas Rigid Twin Cam B Chassis 200 Custom Kit  Comes With: Choice Of Gas Tank Mounts, Pipe Mounting Bracket Bungs, Oil Tank Mounting Bungs, Sissy, Bar/Fender Brace Mounting Bungs, Fender Mounting Bungs At Sear Cross Tube, Plain Front/Rear - Motor Trans Mounting Nuts, Bolts, Washers and Spacers, Bung Type Brake Anchor, 1-3/4in Neck Stem or Custom 2in Neck Stem, Your Choice Of Neck Rake and Frame Stretch, Atlas Top Oil Tank Mounting Brackets, Custom 3/4 Axle adjusters, Chromed Front/Rear - Motor/Transmission Mounting Nuts, Bolts Washers and Spacers, 3/4in Chrome Moly Rear Axle and Spacer Kit, Chrome Neck Cups & Bearings, Polished Stainless Steel Fork Stops.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum TWIN CAM B 250 RIGID RSD Custom Motorcycle CUSTOM KIT

The Atlas Rigid Twin Cam B Chassis 250 Custom Kit Comes With: Choice Of Gas Tank Mounts, Pipe Mounting Bracket Bungs, Oil Tank Mounting Bungs, Sissy Bar/Fender Brace Mounting Bungs, Fender Mounting Bungs At Sear Cross Tube, Plain Front/Rear - Motor Trans Mounting Nuts, Bolts, Washers and Spacers, Bung Type Brake Anchor, 1-3/4in Neck Stem or Custom 2in Neck Stem, your Choice Of Neck Rake and Frame Stretch, Atlas Top Oil Tank Mounting Brackets, Custom 1in Axle Adjusters, Chromed front/Rear - Motor/Transmission Mounting Nuts, Bolts Washers and Spacers, 1in Chrome Moly Rear Axle and Spacer Kit, Chrome Neck Cups & Bearings, Polished Stainless Steel Fork Stops.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum TWIN CAM B 200 RIGID Custom Motorcycle ROLLING CHASSIS 1

The Atlas Rigid Twin Cam B® 200 Tire Rolling Chassis  Includes: 200 Wide Tire Frame, 3/4 Inch Rear Axle, Your Choice Of Neck Rake and Frame Stretch, Your Choice Of Gas Tank Mounts, Pipe Mounting Bracket Bungs, Oil Tank Mounting Bungs, Sissy Bar/Fender Brace Mounting Bungs, Fender Mounting Bungs At Sear Cross Tube, Plain Front/Rear - Motor Trans Mounting Nuts, Bolts, Washers and Spacers, Bung Type Brake Anchor, 1-3/4in Neck Stem or Custom 2in Neck Stem, Wide Glide or Mid Glide front End with Ness Polished Trees, Single Disc Tubes and Sliders, Front Axle and Spacer (Chrome), Ness Fork Stops on Triple Trees, Dust Shields For Front End, 2 Polished Stainless Steel Rotors (1 Front, 1 Rear + Bolts), Polished Performance Machine Forward Controls, 1 Performance Machine Polished Front Caliper and Hanger Kit, 1 Performance Machine Polished Rear Caliper and Hanger Kit, Spoked 19 or 21 Wheel Assembly with Tire and Tube, 5.5 X 18 Spoked Rear Wheel Laced And Trued (60 or 80 Spoke), Avon 200 X 18 Tire and Tube, Atlas Kickstand (Chrome), DNA Billet Headlight, Billet Chrome, Front Fender, Small with Chrome Sides (19 or 21), Atlas Risers and Handlebars with Dampeners and Bolts, Atlas 9in Wide Stubby or Contoured Fender, Atlas Lower Fender Bracket, Atlas Grab Rail or Sissy Bar Atlas Plain Winged Oil Tank, Center or Side Fill with Mounting Brackets and Gromets. Atlas Chromed Front & Rear Motor/Transmission Mounting Bolts, Washers, Spacers, and Nuts.
When Ordering A Rolling Chassis Online:
1.) Forks - Kit price includes front end tubes up to 3 over on length. If you configure your frame such that the neck rake and stretch requires a front end longer than 3 inches over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop.
2.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.
3.) Forward Control Selection - We will provide the correct PM Forward Controls for your frame when you select the mounting type you want (Pre 2000 or 2000-up)

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum TWIN CAM B 250 RIGID RSD Custom Motorcycle ROLLING CHASSIS 2

The Atlas Rigid Twin Cam B® 250 Rolling Chassis (P/N 7005-250) Includes: Frame, 1 Inch Rear Axle, Your Choice Of Neck Rake and Frame Stretch, Your Choice Of Gas Tank Mounts, Pipe Mounting Bracket Bungs, Oil Tank Mounting Bungs, Sissy Bar/Fender Brace Mounting Bungs, Fender Mounting Bungs At Sear Cross Tube, Plain, Front/Rear - Motor Trans Mounting Nuts, Bolts, Washers and Spacers, Bung Type Brake Anchor, 1-3/4in Neck Stem or Custom 2in Neck Stem, Wide Glide or Mid Glide front End with Ness Polished Trees, Single Disc Tubes and Sliders, Front Axle and Spacer (Chrome), Ness Fork Stops on Triple Trees, Dust Shields For Front End, 2 Polished Stainless Steel Rotors (1 Front, 1 Rear + Bolts), Polished Performance Machine Forward Controls, 1 Performance Machine Polished Front Caliper and Hanger Kit, 1 Performance Machine Polished Rear Caliper and Hanger Kit, Spoked 19in or 21in Wheel Assembly with Tire and Tube, 8.5 X 18 Spoked Rear Wheel Laced And Trued (60 or 80 Spoke), Avon 250 Tire and Tube, Atlas Kickstand (Chrome), DNA Billet Headlight, Billet Chrome, Front Fender, Small with Chrome Sides (19in or 21in), Atlas Risers and Handlebars with Dampeners and Bolts, Atlas 11 Wide Stubby or Contoured Fender, Atlas Lower Fender Bracket, Atlas Grab Rail or Sissy Bar (Only Available for 200 Wide Chassis) Atlas Plain Winged Oil Tank, Center or Side Fill with Mounting Brackets and Gromets. Atlas Chromed Front & Rear Motor/Transmission Mounting Bolts, Washers, Spacers, and Nuts.
When Ordering A Rolling Chassis Online:
1.) Forks - Kit price includes front end tubes up to 3 over on length. If you configure your frame such that the neck rake and stretch requires a front end longer than 3 inches over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop.
2.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.
3.) Forward Control Selection - We will provide the correct PM Forward Controls for your frame when you select the mounting type you want (Pre 2000 or 2000-up)
4.) Fender Braces - Atlas does not supply fender struts, sissy bars, or grab rails to support the 11in fender (250 Tire) configuration. You will have to fabricate your own, or work with a shop that can supply a self supporting fender like Milwaukee Iron. We will however, put mounting bungs on the bike for you to attach one to.
5.) Right Side Drive Transmission - Required for this 250 version of this chassis is  sold separately and is also available online within this section of the online catalog.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum DYNA DRAGON SWING ARM Custom Motorcycle CHASSIS

The Dyna® Dragon Swing Arm Chassis for Single and Twin Cam A® engines is not a stock replacement frame for stock Dyna Models. This frame will take a top tube stretch of 3in maximum and a front leg stretch of 4in with any neck rake. The frame takes all stock OEM Dyna® front rear and top motor mounts. The frame is set up with Softail seat mounts and uses a custom seat stock OEM swing arm bearings and pivot assembly. You can use your stock OEM axel and adjusters or use the Atlas custom axle adjusters. The frame uses the 412 series gas shocks 12in which gives you a 6in frame to ground clearance and 4 1/2in oil pan to to ground clearance. The swing arm requires the use of the atlas custom rear caliper and hanger kit not stock. A stock Dyna® belt guard may be used. The frame takes a 180 rear tire with stock Dyna belt 200 with Harley® 1 1/8in belt or chain drive. When using the Harley® 1 1/8 belt you need to change the transmission pulley to 1 tooth larger than stock. The basic chassis kit  comes with: Frame, Swing Arm, Your Choice Of Neck Rake and Stretch. Chrome Moly Rear Axel & Spacer Kit, Evo® Tank Mounts or Straight Top Tube For Custom Fuel Tank Application, Mounts for Dyna or Big Twin® Forward Controls, Bracket For Atlas Battery Box, Bracket for Softail Seat Mount, Utilizes the Stock OEM Dyna® Rubber Mount System, Big Twin® Kickstand Mounts Or Sportster® Center Kickstand Mounts, Rear Set Up For 9 Fender, Atlas Oil Pan Protector.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum DYNA DRAGON Custom Motorcycle CUSTOM KIT

The Dyna Dragon Custom Chassis Kit Includes The Following: Frame, Swing Arm, Evo® Tank Mounts or Straight Top Tube For Custom Fuel Tank Application, chromed, Chrome Moly Rear Axel & Spacer Kit, Atlas Oil Pan Protector, Your Choice Of Neck Rake and Stretch. Mounts for Dyna or Big Twin® Forward Controls, Bracket For Atlas Battery Box, Bracket for Softail Seat Mount, Utilizes the Stock OEM Dyna® Rubber Mount System, Big Twin® Kickstand Mounts Or Sportster® Center Kickstand Mounts. Rear Set Up For 9 Fender, Atlas Oil Pan Protector, Custom Billet Axel Adjusters Polished or Chromed, Polished Stainless Steel Fork Stops, Chrome Neck Cups & Bearings.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum DYNA DRAGON SWING ARM Custom Motorcycle ROLLING CHASSIS

THE ROLLING CHASSIS KIT (P/N 5008) INCLUDES: Dyna or Big Twin® Forward Controls, Bracket For Atlas Battery Box, Bracket for Softail Seat Mount, Utilizes the Stock, OEM Dyna® Rubber Mount System, Big Twin® Kickstand Mounts Or Sportster® Center Kickstand Mounts, Rear Set Up For 9 Fender, Atlas Oil Pan Protector, Your Choice Of Neck Rake & Stretch. Chromed Chrome-Moly Rear Axel & Spacer Kit, Atlas Oil Pan Protector, Chromed Neck Cups, Bearings, and Dust Shields, Stainless Steel Fork Stops.  Progressive Suspension Shocks (412 Gas Series) Providing 6 Frame to Ground Clearance, 4-1/2 Oil Pan to Ground Clearance, 4 Shock Bolts, Atlas 9 Wide Contoured Fender, Atlas Plain Steel Fender Struts, 5.5 X 18 40 Spoke Chrome Rear Wheel (Laced and Trued), 180 X 55 VB 18 Avon Tire & Tube, 19 or 21 Spoked Chrome Front, heel With Tire and Tube, Wide Glide or Mid Glide Front End with Arlen Ness Polished Trees/Tubes & Single Disc Sliders, Arlen Ness Fork Stops In Trees, Arlen Ness Headlight , 4in Risers and Handlebars (Drag to Ape), Small Front Fender With Chrome Sides, Front Axle and Chrome Spacers, Performance Machine 4 Piston Polished Rear Caliper and Hanger Kit, 1 Performance Machine 4 Piston Polished Front Caliper, Polished Performance Machine Forward Controls, 2 Polished and Drilled Rotors with Bolt Kits
Atlas Plain Steel Battery Box and Rear Bracket & 4 Grommets, Atlas Standard, Mid, or Shorty Kickstand (Chrome).
Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Forks - Kit price includes front end tubes up to 3in over on length. If you configure
 your frame such that the neck rake and stretch requires a front end longer than 3 inches
 over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop.
2.) Handlebars included in this package are your choice. Provide us a part number from the Custom Chrome Catalog or Drag Specialties Fat Book for bars that retail for less than $140.00 and we will supply them as part of this package price. The alternative is to give us an idea of what you are looking for and we will supply the closest thing possible. We will call you if there are any questions regarding bars.
3.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.
Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum DYNA DRAGON RIGID Custom Motorcycle CHASSIS

The Atlas Dyna® Dragon Rigid Chassis is set up for either Single Cam or Twin Cam A Dyna® applications. This frame can be ordered in our classic style with Flat Side Evo® Tank Mounts or stretched version for that custom look. The frame is set up for Dynas® from 1991 to present. The left side drive version of this chassis will accept a 180 tire with stock belt or a 200 tire with Harleys® new 1 1/8 belt or chain drive. The motor and transmission is solid mounted not rubber mounted. The right side drive versions will accept a 250-300 wide tire. This chassis is available in two tire width configurations: Left Side Drive (For 180-200 Wide Tire), Right Side Drive (for 250-300 Wide Tire). The Right Side Drive chassis requires the use of a specially designed Right Side Drive transmission. Optional Equipment: Atlas Winged Battery Box in Plain Steel, Atlas Rear Battery Box Mount Bracket & Grommets, Atlas Offset Transmission Sprocket (For Chain Drive 200 Tire 5-Speed), 9in Contoured Rear Fender or Stubby Rear Fender, 11in Fender for 250-300 Frame, Sissy Bar or Grab Rail (For 9in Fenders Only). To Run an 250+ Tire Fender Setup You Will Have To Fabricate Your Own Fender Support. The Atlas Dyna® Dragon 200 Rigid Chassis Comes Stock With the Following Equipment: Frame, Your Choice of Neck Rake and Stretch, Evo Tank Mounts or No Tank mounts, Battery Box Mounts On Frame, Oil Pan Protector, Rear Transmission Mount Bracket With Pivot Axle, Aluminum Top Motor Mount Plate, Chassis Also comes Equiped With Mounts For Dyna® or Big Twin® Forward Controls, Bracket for Atlas Battery Box, Bracket for Softail® Seat Mount, Big Twin® or Mid Kickstand Mounts
Rear Set Up For 9 Fender, Set up to take 3/4in Diameter Axle.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum DYNA DRAGON RIGID Custom Motorcycle CUSTOM KIT for use with a Harley-Davidson Dyna Motor

Custom Chassis Kits Include The Following: Frame, Evo Tank Mounts or No Tank Mounts, Battery Box Mounts On Frame, Oil Pan Protector, Rear Transmission Mount Bracket With Pivot Axel, Aluminum Top Motor Mount Plate, Your Choice of Neck Rake and Stretch, Chrome Chrom-Moly Rear Axle & Spacer Kit 3/4in, Custom Billet Axle Adjusters Polished or Chromed 3/4in, Polished Stainless Steel Fork Stops, Chromed Neck Cuts & Bearings, Polished Engine Case Protector, The Atlas Dyna® Dragon Rigid Chassis Comes Stock With the Following Mounts, Dyna® or Big Twin® Forward Controls, Bracket for Atlas Battery Box, Bracket for Softail® Seat Mount, Big Twin® or Mid Kickstand Mounts, Rear Set Up For 9in Fender.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum DYNA DRAGON RIGID 250 TIRE Custom Motorcycle CHASSIS

The Atlas Dyna® Dragon 250 Rigid Chassis Comes Stock With the Following Equipment : Frame, Your Choice of Neck Rake and Stretch, Evo Tank Mounts or No Tank Mounts, Battery Box Mounts On Frame, Oil Pan Protector, Rear Transmission Mount Bracket With Pivot Axle, Aluminum Top Motor Mount Plate, Chassis. Also Comes Equiped With Mounts For: Dyna® or Big Twin® Forward Controls, Bracket for Atlas Battery Box, Bracket for Softail® Seat Mount, Big Twin® or Mid Kickstand Mounts, 11 Fender, Setup to take 1in Axle.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum DYNA DRAGON RIGID 300 TIRE Custom Motorcycle CHASSIS

The Atlas Dyna® Dragon 300 Rigid Chassis Comes Stock With the Following Equipment: Frame, Your Choice of Neck Rake and Stretch, Evo Tank Mounts or No Tank Mounts, Battery Box Mounts On Frame, Oil Pan Protector, Rear Transmission Mount Bracket With Pivot Axle, Aluminum Top Motor Mount Plate.Chassis Also Comes Equiped With Mounts For: Dyna® or Big Twin® Forward Controls, Bracket for Atlas Battery Box, Bracket for Softail® Seat Mount, Big Twin® or Mid Kickstand Mounts, Setup to take 1in Axle.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum DYNA DRAGON RIGID 200 Custom Motorcycle ROLLING CHASSIS

THE ROLLING CHASSIS KIT INCLUDES: Frame, Your Choice Of Neck Rake & Stretch, Choice of Evo Tank Mounts or No Tank Mounts, Battery Box Mounts On Frame, Oil Pan Protector, Rear Transmission Mount Bracket With Pivot Axel, Aluminum Top Motor Mount Plate, Your Choice of Neck Rake and Stretch, Chrome Chrom-Moly Rear Axle & Spacer Kit 3/4, Custom Billet Axle Adjusters Polished or Chromed 3/4, Polished Stainless Steel Fork Stops, Chromed Neck Cuts & Bearings, Polished Engine Case Protector, Bracket for Atlas Battery Box, Rear Set Up For 9 Fender, 5.5 X 18 40 Spoke Chrome Rear Wheel (Laced and Trued), 19 or 21 Spoked Chrome Front Wheel With Avon Or Metzeler Tire and Tube, 180 X 18 Avon Or Metzeler Tire and Tube, Wide Glide or Mid Glide Front End with Arlen Ness Polished Trees/Tubes & Dual Disc Sliders. Arlen Ness Fork Stops In Trees,Dust Shields, Arlen Ness Headlight, 4 Risers and Handlebars (Drag to Ape), Small 19 or 21 Front Fender With Chrome Sides, Front Axle and Spacers, Performance Machine 4 Piston Polished Rear Caliper and Universal Hanger Kit, Performance Machine 4 Piston Polished Front Caliper, 2 Polished and Drilled Rotors with Bolt Kits, Polished Performance Machine Forward Controls, 9 Wide Stubby or Contoured Rear Fender, Atlas Lower Fender Bracket, Grab Rail or Sissy Bar, Appropriate Length Atlas Kickstand, Chrome Winged Oil Tank With Rear Bracket and 4 Grommets.
Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Forks - Kit price includes front end tubes up to 3 over on length. If you configure your frame such that the neck rake and stretch requires a front end longer than 3 inches over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop.
2.) Handlebars included in this package are your choice. Provide us a part number from the Custom Chrome Catalog or Drag Specialties Fat Book for bars that retail for less than $140.00 and we will supply them as part of this package price. The alternative is to give us an idea of what you are looking for and we will supply the closest thing possible. We will call you if there are any questions regarding bars. 3.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.

Chassis Kits Come Unassembled And Are Not Powder Coated

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WIDE DRIVE 180 Custom Motorcycle CHASSIS KIT

Sportster Wide Drive 180 Softail Chassis. The Wide Drive chassis kit for Sporsters® will accept a 180/55 X 18 rear tire on a 5.5 rim. The frame accepts all Evo® and Ironhead® Sportster motors from 1979 to present. This chassis kit is also available for Buell® motors. The neck is set up to take 1in Timken bearings and 3/4in diameter axle and disc brakes. When running the Buell® rear wheel the rear section will be set up for a 1in axel. To run this chassis you must be shifting on the left and braking on the right with disk brake in the rear. If you are tearing down a Sportster you can use the front end front wheel tank or tanks motor/tranny wiring harness pulleys rear brakes etc. You cannot use your oil tank as this frame requires a special Atlas tank or custom tank you fabricate yourself as the Big Twin® tank is too large and the stock Sportster® tank is too small. The rear section is set up for the wide tire so you will need a special fender fender struts tire and wheel. You can also use your stock rear wheel but you will have to get a stock Softail rear fender and solid fender struts. The frame can be set up for late Sportster gas tank mounts Evo® Fat Bob® tank mounts or custom fuel tank application 89 and later Softail® shock mount early Sportster kickstand or Big Twin® forward control mounts. Several kit packages are available from the basic frame to a complete rolling chassis kit. See the Additional Information links below for full details.  Basic Chassis Includes: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Steel Pivot Axle & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WIDE DRIVE 180 Custom Motorcycle STARTER KIT

STARTER KIT # 1 INCLUDES: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Steel Pivot Axle & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. Chromed Chrome-Moly Rear Axle Kit.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WIDE DRIVE 180 Custom Motorcycle BUILDER KIT

BUILDERS KIT # 2 INCLUDES: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. Chromed Chrome-Moly Rear Axel Kit, Plain Steel Oil Tank & Mount Bracket, Chrome Steel Pivot Axel & Bolt Kit, Swingarm Bearings & Clips, 8 1/2in Plain Steel Fender Struts, 8 1/2in Contoured Rear Fender, Atlas Chromed Kickstand.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WIDE DRIVE Custom Motorcycle CUSTOM KIT

CUSTOM KIT # 3 INCLUDES: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. Chromed Chrome-Moly Rear Axle Kit, Plain Steel Oil Tank & Mount Bracket, Chrome Steel Pivot Axle & Bolt Kit, Swingarm Bearings & Clips, Atlas Chromed Kickstand, Polished Stainless Steel Fork Stops, Custom Axel Adjusters, 8 1/2in Chromed Steel Fender Struts, 8 1/2in FXST® Bobbed Rear Fender, 8 1/2in Chromed Steel License Bracket, Custom Light Kit for FXST® Fender, 5.5 X 18 Spoked Rear Wheel (Chrome), 180 X 18 Metzeler or Avon Tire & Tube, 136 Tooth 1 1/8in Belt for Atlas Sportster Chassis.

Contact Us For A Quote!

See Also:

• ATLAS SPORTY WIDE DRIVE 180 Custom Motorcycle ROLLING CHASSIS KIT

THE ROLLING CHASSIS KIT (P/N 3013) INCLUDES: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. 1 Chromed Chrome-Moly Rear Axel Kit, Chromed Neck Cups, Bearings, and Dust Shields, ProStainless Steel Engine Case Protector, Stainless Steel Fork Stops, Progressive Suspension Shocks, 4 Shock Bolts, Chrome Pivot Axle & Bolt Kit, Stainless Steel Rock Guard Kit, USA Swingarm Bearings and Clips, Custom Axle Adjusters
Chromed Chrome-Moly Rear Axel & Spacer Kit, Atlas 8-1/2 Chrome Steel Fender Struts (Blind Holes), Atlas 8-1/2 Contoured Rear Fender (18 Gauge Steel), 5.5 X 18 Spoke Chrome Rear Wheel (Laced and Trued), 180 X 18 Avon Tire, 19 or 21 Spoked Chrome Front Wheel With, Avon Tire and Tube, Wide Glide or Mid Glide Front End with Arlen Ness Polished Trees/Tubes & Single Disc Sliders, Arlen Ness Fork Stops In Trees, DNA Chromed Billet Headlight, 4 Risers and Handlebars (Drag to Ape), Small Front Fender With Chrome Sides, Front Axle and Chrome Spacers, Performance Machine 4 Piston Polished Rear Caliper and Hanger Kit, 1 Performance Machine 4 Piston, polished Front Caliper, Polished Performance Machine Forward Controls, 2 Polished and Drilled Rotors with Bolt Kits, Atlas Plain Steel Winged Oil Tank and Mounting Brackets, Atlas Standard, Mid, or Shorty Kickstand (Chrome), Atlas 136 Tooth 1-1/8 Belt For Sportster, Atlas Sporty Top Motor Mount Strap With Coil Mount (Chrome)
Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Forks - Kit price includes front end tubes up to 3 over on length. If you configure your frame such that the neck rake and stretch requires a front end longer than 3 inches over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop.
2.) Handlebars included in this package are your choice. Provide us a part number from the Custom Chrome Catalog or Drag Specialties Fat Book for bars that retail for less than $140.00 and we will supply them as part of this package price. The alternative is to give us an idea of what you are looking for and we will supply the closest thing possible. We will call you if there are any questions regarding bars.
3.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.
Chassis Kits Come Unassembled And Are Not Powder Coated

Contact Us For A Quote!

See Also:

• ATLAS SPORTY WIDE DRIVE 180 Custom Motorcycle ROLLING CHASSIS KIT

Sportster Wide Drive 200 Softail Custom Motorcycle Chassis Kit. The 200 Wide Drive chassis kit for Sporsters® will accept a 200 rear tire on a 5.5 rim. The frame accepts 5 Speed Evo® Sportster® motors only. This chassis kit is also available for Buell® motors. The neck is set up to take 1 Timken bearings and 3/4 diameter axle and disc brakes. To run this chassis you must be shifting on the left and braking on the right with disk brake in the rear. If you are tearing down a Sportster you can use the front end front wheel tank or tanks motor/tranny wiring harness pulleys rear brakes etc. You cannot use your oil tank as this frame requires a special Atlas tank or custom tank you fabricate yourself as the Big Twin® tank is too large and the stock Sportster® tank is too small. The rear section is set up for the wide tire so you will need a special fender fender struts tire and wheel. You can also use your stock rear wheel but you will have to get a stock Softail® rear fender and solid fender struts. The frame can be set up for late Sportster® gas tank mounts Evo® Fat Bob® tank mounts or custom fuel tank application 89 and later Softail shock mount early Sportster® kickstand or Big Twin® forward control mounts. Atlas also recommends that you run the Atlas Offset Sprocket or Pulley and the Atlas Support Plate with bearing to accomodate the 250 tire. Several kit packages are available from the basic frame to a complete rolling chassis kit. See the Additional Information links below for full details.    The basic chassis kit (P/N 3005) comes with: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, steel Pivot Axle & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WIDE DRIVE 200 Custom Motorcycle ROLLING CHASSIS KIT

THE ROLLING CHASSIS KIT (P/N 3014) INCLUDES: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Steel Pivot Axle & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. 1in Chromed Chrome-Moly Rear Axle Kit, Chromed Neck Cups, Bearings, and Dust Shields, Stainless Steel Engine Case Protector, Stainless Steel Fork Stops, Progressive Suspension Shocks, 4 Shock Bolts, Chrome Pivot Axle & Bolt Kit, Stainless Steel Rock Guard Kit, USA Swingarm Bearings and Clips, Custom Axle Adjusters, Chromed Chrome-Moly Rear Axel & Spacer Kit, Atlas 9in Chrome Steel Fender Struts (Blind Holes), Atlas 9in Contoured Rear Fender (18 Gauge Steel), 5.5 X 18 Spoke Chrome Rear Wheel (Laced and Trued), 200 X 18 Avon Tire, 19 or 21 Spoked Chrome Front Wheel With, Avon Tire and Tube, Wide Glide or Mid Glide Front End with Arlen Ness Polished Trees/Tubes & Single Disc Sliders, Arlen Ness Fork Stops In Trees, DNA Chromed Billet Headlight, 4 Risers and Handlebars (Drag to Ape), Small Front Fender With chrome Sides, Front Axle and Chrome Spacers, Performance Machine 4 Piston Polished Rear Caliper and Hanger Kit, 1 Performance Machine 4 Piston Polished Front Caliper, Polished Performance Machine Forward Controls, 2 Polished and Drilled Rotors with Bolt Kits, Atlas Plain Steel Winged Oil Tank and Mounting Brackets, Atlas Standard, Mid, or Shorty Kickstand (Chrome), Atlas 136 Tooth 1-1/8 Belt For Sportster, Atlas Sporty Top Motor Mount Strap With Coil Mount (Chrome)
Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Forks - Kit price includes front end tubes up to 3 over on length. If you configure your frame such that the neck rake and stretch requires a front end longer than 3 inches over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop.
2.) Handlebars included in this package are your choice. Provide us a part number from the Custom Chrome Catalog or Drag Specialties Fat Book for bars that retail for less than $140.00 and we will supply them as part of this package price. The alternative is to give us an idea of what you are looking for and we will supply the closest thing possible. We will call you if there are any questions regarding bars.
3.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.
Chassis Kits Come Unassembled And is Not Powder Coated

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WIDE DRIVE 200 Custom Motorcycle STARTER KIT

STARTER KIT # 1  INCLUDES: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. 1in Chromed Chrome-Moly Rear Axle Kit.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WIDE DRIVE 200 Custom Motorcycle BUILDER KIT

BUILDERS KIT # 2  INCLUDES: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. Chromed 1in Chrome-Moly Rear Axle Kit, Plain Steel Oil Tank & Mount Bracket, Chrome Steel Pivot Axle & Bolt Kit, Swingarm Bearings & Clips, 11in Plain Steel Fender Struts, 11in Contoured Rear Fender, Atlas Chromed Kickstand.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WIDE DRIVE 200 Custom Motorcycle CUSTOM KIT

CUSTOM KIT # 3 INCLUDES: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit,. Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch.Chromed Chrome-Moly Rear Axle Kit, Chromed Chrome-Moly Rear Axle Kit, Plain Steel Oil Tank & Mount Bracket, Chrome Steel Pivot Axle & Bolt Kit, Swingarm Bearings & Clips, Atlas Chromed Kickstand, Polished Stainless Steel Fork Stops, Custom Axel Adjusters, 9in Chromed Steel Fender Struts, 9in Contoured Rear Fender, 5.5 X 18 Spoked Rear Wheel (Chrome), 200 X 18 Metzeler or Avon Tire & Tube, 136 Tooth 1 1/8in Belt for Atlas Sportster® Chassis.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WIDE DRIVE 250 Custom Motorcycle CHASSIS KIT

The 250 Wide Drive chassis kit for Sporsters will accept a 250 rear tire on an 8.5 rim. The frame accepts 5 Speed Evo® Sportster® motors only. This chassis kit is also available for Buell® motors. The neck is set up to take 1in Timken bearings and 1 diameter axel and disc brakes. To run this chassis you must be shifting on the left and braking on the right with disk brake in the rear. If you are tearing down a Sportster® you can use the front end front wheel tank or tanks motor/tranny wiring harness pulleys rear brakes etc. You cannot use your oil tank as this frame requires a special Atlas tank or custom tank you fabricate yourself as the Big Twin tank is too large and the stock Sportster tank is too small. The rear section is set up for the wide tire so you will need a special fender fender struts tire and wheel. You can also use your stock rear wheel but you will have to get a stock Softail® rear fender and solid fender struts. The frame can be set up for late Sportster® gas tank mounts Evo Fat Bob tank mounts or custom fuel tank application 89 and later Softail shock mount early Sportster kickstand or Big Twin forward control mounts. Atlas also recommends that you run the Atlas Offset Sprocket or Pulley and the Atlas Support Plate with bearing to accomodate the 250 tire.    The basic chassis kit  comes with: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Steel Pivot Axle & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WIDE DRIVE 250 Custom Motorcycle STARTER KIT

STARTER KIT # 1  INCLUDES: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Steel Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. 1in Chromed Chrome-Moly Rear Axle Kit.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WIDE DRIVE 250 Custom Motorcycle BUILDER KIT

BUILDERS KIT # 2 (P/N 3011) INCLUDES: Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Steel pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. Chromed 1in Chrome-Moly Rear Axle Kit, Plain Steel Oil Tank & Mount Bracket, Chrome Steel Pivot Axle & Bolt Kit, Swingarm Bearings & Clips, 11in Plain Steel Fender Struts, 11in Contoured Rear Fender, Atlas Chromed Kickstand.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WIDE DRIVE 250 Custom Motorcycle CUSTOM KIT

Frame, Swingarm, Brushed Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Steel Pivot Axle & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. Chromed Chrome-Moly Rear Axle Kit, Chromed Chrome-Moly Rear Axle Kit, Plain Steel Oil Tank & Mount Bracket, Chrome Steel Pivot Axle & Bolt Kit, Swingarm Bearings & Clips, Atlas Chromed Kickstand, Polished Stainless Steel Fork Stops, Custom Axel Adjusters, 11in Chromed Steel Fender Struts, 11in Contoured Rear Fender, 8.5 X 18 Spoked Rear Wheel (Chrome), 250 X 18 Metzeler or Avon Tire & Tube, 136 Tooth 1 1/8 Belt for Atlas Sportster Chassis.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WIDE DRIVE 250 Custom Motorcycle ROLLING CHASSIS KIT

THE ROLLING CHASSIS KIT (P/N 3015) INCLUDES: Frame, Swingarm, Stainless Steel Rock Guard & Bolt Kit, Front Motor Mount, Billet Aluminum Rear Motor Mount, Pivot Axel & Spacer, Aluminum Top Motor Mount Plate, Shock Safety Plate Kit, Urethane Swingarm Bumper Pads, Your Choice Of Neck Rake & Stretch. 1in Chromed Chrome-Moly Rear Axel Kit, Chromed Neck Cups, Bearings, and Dust Shields, Polished Stainless Steel Engine Case Protector, Stainless Steel Fork Stops, Progressive Suspension Shocks, 4 Shock Bolts, Chrome Pivot Axle & Bolt Kit, Stainless Steel Rock Guard Kit, USA Swingarm Bearings and Clips, Custom Billet 1in Axle Adjusters,
Atlas 11in Chrome Steel Fender Struts (Blind Holes), Atlas 11in Contoured Rear Fender (18 Gauge Steel), 8.5 X 18 Spoke Chrome Rear Wheel (Laced and Trued), 250 X 18 Avon Tire, 19 or 21 Spoked Chrome Front Wheel With Avon Tire and Tube, Wide Glide or Mid Glide Front End with Arlen Ness Polished Trees/Tubes & Single Disc Sliders, Arlen Ness Fork Stops In Trees, DNA Chromed Billet Headlight, Atlas Risers, Drag Bars, Dampeners and Bolts. Small Front Fender With Chrome Sides, Front Axle and Chrome Spacers, Performance Machine 4 Piston Polished Rear Caliper and Hanger Kit, 1 Performance Machine 4 Piston Polished Front Caliper, Polished Performance Machine Forward Controls, 2 Polished and Drilled Rotors with Bolt Kits, Atlas Plain Steel Winged Oil Tank and Mounting Brackets, Atlas Standard, Mid, or Shorty Kickstand (Chrome), Atlas 136 Tooth 1-1/8 Belt For Sportster, Atlas Sporty Top Motor Mount Strap With Coil Mount (Chrome), Atlas Offset Sprocket Or Offset Pulley , Atlas Support Plate With Bearings.

Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Forks - Kit price includes front end tubes up to 3 over on length. If you configure your frame such that the neck rake and stretch requires a front end longer than 3 inches over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop. Additional charges above what are shown here will be incurred if a special front end type is preferred. Call the factory for details.
2.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.
Chassis Kits Come Unassembled And Are Not Powder Coated

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY RIGID COYOTE Custom Motorcycle 200 TIRE CHASSIS

This is the Sportster® version of our Roadrunner rigid chassis. The Atlas Coyote comes with any neck rake and stretch Evo® tank mounts or straight top tube for custom tank application or Sporty tank mounts. Set up for 4 or 5 speed transmission and stroker motor clearance this frame will take a 200 wire with rear belt. This frame is set up for 79 and later Ironhead® or Evolution® motors. You must be shifting on the left and braking on the right with disc brake in the rear in order to run this chassis. You will need to run the Atlas Custom Oil Tank or fabricate one yourself as the Big Twin is too big and the Sportster® is too small. If you are planning to run a belt drive you need a longer belt (136 tooth 1 1/8 belt). If planning to run a chain you will need a longer chain (an FXR® chain will work for those applications.)  The Atlas Coyote Sportster Rigid Frame  Comes Stock with the Following: Frame, Front Motor Mount, Billet Aluminum Rear Motor Mount, Top Motor Mount Plate, FXST® Oil Tank Rear Mounting Bungs, Sissy Bar/Fender Brace Mounting Bungs, Fender Mounting Bungs At Seat Cross Bar, Bung Type Brake Anchor Tab For Universal Hanger, Your Choice of Neck Rake and Stretch.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY RIGID COYOTE Custom Motorcycle 200 TIRE CUSTOM CHASSIS KIT

The Atlas Coyote Sportster Rigid Custom Kit Comes With Following: Frame, Front Motor Mount, Billet Aluminum Rear Motor Mount, Top Motor Mount Plate, FXST® Oil Tank Rear Mounting Bungs, Sissy Bar/Fender Brace Mounting Bungs, Fender Mounting Bungs At Seat Cross Bar, Bung Type Brake Anchor Tab For Universal Hanger, Your Choice of Neck Rake and Stretch, Custom Axel Adjusters, Chrome Moly Rear Axle Kit 3/4in Diameter, Chrome Neck Cups and Bearings, Polished Stainless Steel Fork Stops, Polished Stainless Steel Engine Case Protector.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY RIGID COYOTE Custom Motorcycle ROLLING CHASSIS Kit

THE ROLLING CHASSIS KIT (P/N 6006) INCLUDES: Frame, Front Motor Mount, Billet Aluminum Rear Motor Mount, Top Motor Mount Plate, FXST® Oil Tank Rear Mounting Bungs, Sissy Bar/Fender Brace Mounting Bungs, Fender Mounting Bungs At Seat Cross Bar, Bung Type Brake Anchor Tab For Universal Hanger, Your Choice of Neck Rake and Stretch, Custom Axel Adjusters, Chrome Moly Rear Acel Kit 3/4in Diameter, Chrome Neck Cups and Bearings with Dust Shields, Polished Stainless Steel Fork Stops, Polished Stainless Steel Engine Case, 5.5 X 18 Chrome Rear Wheel (Laced and Trued), 180 X 55 VB 18 Avon Tire & Tube, 19 or 21 Spoked Chrome Front Wheel With Avon or Metzeler Tire and Tube, Wide Glide or Mid Glide Front End with Arlen Ness Polished Trees/Tubes & Single Disc Sliders, Arlen Ness Fork Stops In Trees, Arlen Ness Headlight, 4 Risers and Handlebars (Drag to Ape), Small Front Fender With Chrome Sides, Front Axle and Chrome Spacers, Performance Machine 4 Piston Polished Rear Caliper and Hanger Kit, Universal Mount With Heim Fitting, 1 Performance Machine 4 Piston Polished Front Caliper, Polished Performance Machine Forward Controls, 2 Polished and Drilled Rotors with Bolt Kits, 9in Stubby Rear Fender, Atlas Lower Fender Bracket, Atlas Grab Rail or Sissy Bar, Chromed Winged Oil Tank With 4 Grommets & Rear Brackets, Atlas Standard, Mid, or Shorty Kickstand (Chrome).
Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Forks - Kit price includes front end tubes up to 3 over on length. If you configure your frame such that the neck rake and stretch requires a front end longer than 3 inches over stock, there will be a cost adder. We will contact you to verify the charges before we generate your order. If you wish to specify a front end please do so when you configure your chassis. We can tell you what length will be required. Additional charges will apply. We will contact you via phone or e-mail to verify your order and charges before we submit your order to the shop.
2.) Handlebars included in this package are your choice. Provide us a part number from the Custom Chrome Catalog or Drag Specialties Fat Book for bars that retail for less than $140.00 and we will supply them as part of this package price. The alternative is to give us an idea of what you are looking for and we will supply the closest thing possible. We will call you if there are any questions regarding bars.
3.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.
Chassis Kits Come Unassembled And Are Not Powder Coated
Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY RIGID Custom Motorcycle 250 CHASSIS KIT

This 250 tire rigid chassis for Sportsters® and Buell® is set up to take all the biggest tires on the market 230-250 up to 300. In order to run this chassis you will need to use the Atlas Offset Transmission Sprocket or Pulley and also the support plate with bearing to clear these massive tires. This frame is set up to take Big Twin® forward controls front ends that make a 1 Timken bearings 1 rear axel and 1 axel adjusters. This frame is set up for 5 speed transmission motor packages only.
Optional Equipment For the Atlas 250 Rigid Frame Include:  Atlas Sportster® Oil Tank Top Mount With Brackets, 136 Tooth X 1-1/8 Wide Belt, 11in Stubby Rear Fender, 11in Contoured Rear Fender, Lower Fender Mounting Bracket For 250, Fender Struts (Aluminum or Steel) For Solo Application, Atlas Offset Sprocket or Offset Pulley, Atlas Support Plate With Bearing, Several kit packages are available from the basic frame to a complete rolling chassis kit. See the Additional Information links below for full details. The Atlas 250 Sportster® Rigid Frame Comes Stock With The Following: Frame, Aluminum Top Motor Mount Plate, Front Motor Mount, Billet Aluminum Rear Motor Plate, FXST® Oil Tank Rear Mounting Plate, Sissy Bar / Fender Brace Mounting Bungs, Fender Mounting Bungs At Seat Cross Bar, Bung Type Brake Anchor Tab For Universal Hanger, Stock 1-3/4 Neck Stem or Custom 2 Neck Stem.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY Custom Motorcycle RIGID 250 CUSTOM KIT

The Atlas 250 Sportster® Rigid Custom Kit Comes With The Following: Frame, Aluminum Top Motor Mount Plate, Front Motor Mount, Billet Aluminum Rear Motor Plate,
FXST® Oil Tank Rear Mounting Plate, Sissy Bar / Fender Brace Mounting Bungs, Fender Mounting Bungs At Seat Cross Bar, Bung Type Brake Anchor Tab For Universal Hanger, Stock 1-3/4in Neck Stem or Custom 2in Neck Stem, Atlas Custom Axle Adjusters 1(C), Chrome Moly Rear Axel Kit 1, Chrome Neck Cups and Bearings, Polished Stainless Steel Fork Stops, Polished Stainless Steel Engine Case Protector.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY Custom Motorcycle RIGID 300 CHASSIS Kit

The Atlas 300 Sportster® Rigid Frame Comes Stock With The Following: Frame, Aluminum Top Motor Mount Plate, Front Motor Mount, Billet Aluminum Rear Motor Plate, FXST® Oil Tank Rear Mounting Plate, Sissy Bar / Fender Brace Mounting Bungs, Fender Mounting Bungs At Seat Cross Bar, Bung Type Brake Anchor Tab For Universal Hanger, Stock 1-3/4in Neck Stem or Custom 2in Neck Stem.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY RIGID 250 Custom Motorcycle ROLLING CHASSIS Kit

THE ROLLING CHASSIS KIT FOR A 250 TIRE SETUP(P/N 6007) INCLUDES: 250 Wide Tire Frame, Aluminum Top Motor Mount Plate, Front Motor Mount, Billet Aluminum Rear Motor Plate, FXST® Oil Tank Rear Mounting Plate, Sissy Bar / Fender Brace Mounting Bungs, Fender Mounting Bungs At Seat Cross Bar, Bung Type Brake Anchor Tab For Universal Mount, Your Choice of Neck Rake and Stretch, RC Comp 19 or 21 Front Wheel Any Style, 3 RC Comp 11-1/2in Rotors To Match, 250 X 18 Avon Rear Tire, 19 or 21 Front Tire And Tube To Match, Atlas Cobra Style Front Fender. Atlas 11in Rear Contoured or Stubby Rear Fender. Atlas Lower Fender Bracket, Atlas Plain Steel Top Mount Oil Tank With All Mounts, D&D Fat Katz Tank With Flush Mount Cap, Atlas Drag Bars and Mounting Kit. Cerani Front End Inverted Forks, Dual Disc. Cerani Internal Fork Stops, Neck Cups and Bearings, Custom Chrome Billet Axle Adjusters, Chrome Moly Rear Axle Kit 1in Diameter, Chrome Neck Cups and Bearings with Dust Shields, DNA Chrome Billet Headlight, Performance Machine 4 Piston Chromed Rear Caliper and Hanger Kit, Custom, Atlas Rear Caliper Hanger, 2 Performance Machine 4 Piston Chromed Front Calipers, Performance Machine Chrome Contoured Forward Controls, Atlas Standard, Mid, or Shorty Kickstand (Chrome), 136 Tooth 1-1/8in Belt For Sporty, Atlas Custom Sporty Top Motor Mount Strap With Coil Mount, Atlas Offset Sprocket for Offset Pulley Kit, Atlas Support Plate With Bearings.
Rolling Chassis Ordering Notes - Please Read Carefully!
1.) Wheels, Rotors, Pulley: Your Selection Of RC Component Wheels, Rotors, and Pulleys Can Be Viewed Here. You will need to know which setup you desire when you Click to Configure  your rolling chassis.
2.) Fat Katz Tank: We will select the tank appropriate for your top tube stretch on the frame. You or your local shop will have to weld the tabs in place on the frame to mount this tank.
3.) Kickstand - When you configure your chassis, we will review the order carefully to insure you get the right kickstand based on neck rake, stretch, tire size, etc.
4.) Rear Fender Support - Altas does not make a grab rail or sissybar for the 11in fender or larger fender required for tires over 250 wide. You will either need to purchase our 9in fender struts (for solo applications only) and mounting tabs (which you will have to weld to the frame) or design another solution for rear fender support.

Chassis Kits Come Unassembled And Are Not Powder Coated

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum 2004-Up Sportster Softail Custom Motorcycle Chassis

THE NEW SPORTSTER SOFTAIL CHASSIS FOR 2004 AND UP IS SOLID MOUNTED IN OUR CUSTOM CHASSIS. THE FRAME IS SET UP FOR 2004 AND LATER SPORTSTER AND BUELLS. AS WITH ALL ATLAS CHASSIS IT WILL COME WITH ANY NECK RAKE AND STRETCH AND TAKES BIG TWIN FORWARD CONTROLS. THE REAR BRAKE IS CUSTOM APPLICATION. CHASSIS KIT COMES WITH: FRAME SWING ARM BRUSHED S.S. ROCK GUARD STEEL PIVOT AXLE & BOLT KIT ALUMINUM TOP MOTOR MOUNT PLATE FRONT AND REAR MOTOR MOUNT BRACKET AND BOLT KIT SHOCK SAFETY PLATE KIT URETHANE SWING ARM BUMPER PADS.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum WINGED Stainless Steel OIL TANK (PLAIN)

Atlas has a new oil tank with top mounts that fits perfectly with the side plates on the frame giving it that true custom look. Available in center fill only. oil tank comes with all mounting hardware top and rear. Available in plain stainless or polished stainless steel. Note: Frame requires top mount oil tank tabs for mounting. Be sure to specify this when configuring your frame.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum WINGED OIL TANK CENTER FILL CHROMED

This stock capacity oil tank is available for Atlas Rigid Big Twin 180 or 200 Wide Tire chassis Only.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum WINGED OIL TANK CENTER FILL PLAIN

This stock capacity oil tank is available for Atlas Rigid Big Twin 180 or 200 Wide Tire chassis Only.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum WINGED OIL TANK SIDE FILL CHROMED

This stock capacity oil tank is available for Atlas Rigid Big Twin 180 or 200 Wide Tire chassis Only.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum WINGED OIL TANK SIDE FILL PLAIN

This stock capacity oil tank is available for Atlas Rigid Big Twin 180 or 200 Wide Tire chassis Only

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum 250 WINGED OIL TANK (PLAIN)

Built for the 250 Right Side Drive chassis these oil tanks come complete with all
 mounting hardware. The oil tank is top mounted and comes in center fill only. Made
 of durable steel you should have no problem mounting this oil tank to our chassis

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum 250 WINGED OIL TANK (PLAIN) FOR TWIN CAM B 250 Custom Motorcycle CHASSIS

Built for the 250 Right Side Drive chassis these oil tanks come complete with all
 mounting hardware. The oil tank is top mounted and comes in center fill only. Made
 of durable steel you should have no problem mounting this oil tank to our chassis

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum 250 WINGED OIL TANK (PLAIN) FOR EVO SOFTAIL Custom Motorcycle CHASSIS

Built for the 250 Right Side Drive chassis these oil tanks come complete with all
 mounting hardware. The oil tank is top mounted and comes in center fill only. Made
 of durable steel you should have no problem mounting this oil tank to our chassis

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum DYNA DRAGON BATTERY BOX WINGED

This battery box gives the Dyna Chassis, Rigid or Swing arm, that custom look. It looks like an oil tank, but it's not. It is used to house the battery, wiring, etc. It is available in plain steel only

Select your choice from the drop down list below and click 'Check Price'.

price:BATTERY BOX WINGED

 

See Also:

• ATLAS Pro Magnum SPORTY WINGED OIL TANK SOFTAIL (PLAIN)

Atlas has a custom winged oil tank for the Sporty Softail 180 or 200 chassis.
The tank takes the standard electric start battery and comes with a chrome filler plug

Contact Us For A Quote!

See Also:

• ATLAS Precision Pro Magnum TOP MOTOR MOUNT

These motor mount straps are available with or without coil mounting holes and are used to attach the engine cylinders to the top motor mount.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WINGED OIL TANK RIGID (PLAIN)

This oil tank is custom made for the Sportster Rigid Chassis. The tank is rubber mounted and comes with all mounting hardware top and rear and a chrome filler plug. This tank can be ordered in a side or center fill configuration.

Contact Us For A Quote!

See Also:

• ATLAS Pro Magnum SPORTY WINGED OIL TANK RIGID (CHROME)

This oil tank is custom made for the Sportster Rigid Chassis. The tank is rubber mounted and comes with all mounting hardware top and rear and a chrome filler plug. This tank can be ordered in a side or center fill configuration.

Contact Us For A Quote!

See Also: