Twisted Choppers Motorcycles and Products - Twisted Choppers Motorcycles and Products for Harley Davidson Motorcycles and Custom Motorcycles

CLICK HERE FOR A BIGGER PICTURE

CLICK HERE TO SEE TWISTED CHOPPERS FLANGE SET

TWISTED CHOPPERS HOOKAH 2 INTO 1 EXHAUST HEADER FOR EVO/TWIN CAM ENGINES. 1.75" 16 GAUGE TUBES FROM THE HEAD INTO 1.875" 16 GAUGE AND THEN COMBINE INTO THE 3" 16 GAUGE SLASH CUT COLLECTOR. MOUNTING BOSS ON THE BACK SIDE OF THE COLLECTOR.

FITS 84-99 BIG TWIN EVOLUTION AND 99-PRESENT TWIN CAM ENGINES

REQUIRES USE OF FACTORY EXHAUST FLANGES, CLIPS AND NUTS.
SO BE SURE TO ADD A CHROME FLANGE SET WHEN YOU ORDER.

WILL NOT WORK WITH THE FOLLOWING:

MID MOUNTED FOOT CONTROLS
SOME AIR CLEANER MODIFICATION MAY BE NEEDED FOR CLEARANCE

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Finish:Select OneChromeChrome with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

Add Chrome Flange Set:Select An OptionChrome Flange Set

 

CLICK HERE FOR A BIGGER PICTURE         

CLICK HERE TO SEE TWISTED CHOPPERS FLANGE SET

TWISTED CHOPPERS 2 INTO 1 HOOKAH HEADER FOR YOUR EVO/TWIN CAM ENGINE. THIS HEADER IS CERAMIC COATED IN A SATIN BLACK FINISH. 1.75" 16 GAGE TUBES FROM THE HEAD INTO 1.875" 16 GAGE AND THEN COMBINE INTO THE 3" 16 GAGE SLASH CUT COLLECTOR. MOUNTING BOSS ON THE BACK SIDE OF THE COLLECTOR.

FITS 84-99 BIG TWIN EVOLUTION AND 99-PRESENT TWIN CAM ENGINES

REQUIRES USE OF FACTORY EXHAUST FLANGES, CLIPS AND NUTS.
SO BE SURE TO ADD A CHROME FLANGE SET WHEN YOU ORDER.

WILL NOT WORK WITH THE FOLLOWING:

MID MOUNTED FOOT CONTROLS
SOME AIR CLEANER MODIFICATION MAY BE NEEDED FOR CLEARANCE

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Finish:Select OneSatin BlackSatin Black with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

Add Chrome Flange Set:Select An OptionChrome Flange Set

 

CLICK HERE FOR A BIGGER PICTURE

CLICK HERE TO SEE TWISTED CHOPPERS FLANGE SET

TWISTED CHOPPERS 2 INTO 1 HOOKAH EXHAUST HEADER FOR YOUR EVO/TWIN CAM ENGINE. 1.75" 16 GAUGE TUBES FROM THE HEAD INTO 1.875" 16 GAUGE AND THEN COMBINE INTO THE 3" 16 GAUGE SLASH CUT COLLECTOR. MOUNTING BOSS ON THE BACK SIDE OF THE COLLECTOR. THIS IS THE RAW VERSION.

FITS 84-99 BIG TWIN EVOLUTION AND 99-PRESENT TWIN CAM ENGINES

REQUIRES USE OF FACTORY EXHAUST FLANGES, CLIPS AND NUTS.
SO BE SURE TO ADD A CHROME FLANGE SET WHEN YOU ORDER.

WILL NOT WORK WITH THE FOLLOWING:

MID MOUNTED FOOT CONTROLS
SOME AIR CLEANER MODIFICATION MAY BE NEEDED FOR CLEARANCE

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Finish:Select OneRaw SteelRaw Steel with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

Add Chrome Flange Set:Select An OptionChrome Flange Set

 

CLICK HERE FOR A BIGGER PICTURE

CLICK HERE TO SEE TWISTED CHOPPERS FLANGE SET

MADE FOR YOUR EVOLUTION STYLE ENGINE OR NEWER TWIN CAM MODELS. CONSTRUCTED OF 16 GAUGE MILD STEEL TUBING AND ALL TIG WELDED. HAS A BOSS ON THE BACK SIDE FOR SECURE MOUNTING TO THE FRAME, ENGINE OR TRANSMISSION.

2 PIECE BOLT TOGETHER DESIGN

FITS 84-99 BIG TWIN EVOLUTION AND 99-PRESENT TWIN CAM ENGINES

REQUIRES USE OF FACTORY EXHAUST FLANGES, CLIPS AND NUTS.
SO BE SURE TO ADD A CHROME FLANGE SET WHEN YOU ORDER.

WILL NOT WORK WITH THE FOLLOWING:

MID MOUNTED FOOT CONTROLS
SOME AIR CLEANER MODIFICATION MAY BE NEEDED FOR CLEARANCE

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Finish:Select OneRaw SteelRaw Steel with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

Add Chrome Flange Set:Select An OptionChrome Flange Set

 

CLICK HERE FOR A BIGGER PICTURE

TWISTED CHOPPERS HOOKAH 2 INTO 1 EXHAUST HEADER FOR EVO/TWIN CAM ENGINES. 1.75" 16 GAUGE TUBES FROM THE HEAD INTO 1.875" 16 GAUGE AND THEN COMBINE INTO THE 3" 16 GAUGE SLASH CUT COLLECTOR. MOUNTING BOSS ON THE BACK SIDE OF THE COLLECTOR. 

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Header:Select OnePanhead Hookah HeaderPanhead Hookah Header with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

 

CLICK HERE FOR A BIGGER PICTURE

BASED OFF OUR HOOKAH STYLE HEADERS THESE ARE A ONE PIECE HEADER FOR YOUR SPORTSER/BUELL ENGINE. 1.75" 16 GAUGE TUBES FROM THE HEAD INTO 1.875" 16 GAUGE AND THEN INTO 1.75" 16 GAUGE SLASH CUT AND ANGLED TUBES. MOUNTING BOSS ON THE BACK SIDE OF THE LOWER PIPES.

2 PIECE BOLT TOGETHER DESIGN

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Header:Select OnePanhead Slashcut HeaderPanhead Slashcut Header with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

 

CLICK HERE FOR A BIGGER PICTURE

CLICK HERE TO SEE TWISTED CHOPPERS SHOVELHEAD FLANGES

ALL NEW TWISTED CHOPPERS SHOVELHEAD HOOKAH HEADER. SAME GREAT STYLING AS OUR EVO AND SPORTY/BUELL VERSIONS, BUT NOW AVAILABLE FOR YOUR SHOVELHEAD ENGINE. 1.75" 16 GAUGE TUBES FROM THE HEAD INTO 1.875" 16 GAUGE AND THEN COMBINE INTO THE 3" 16 GAUGE SLASH CUT COLLECTOR. MOUNTING BOSS ON THE BACK SIDE OF THE COLLECTOR.

FITS 1966-85, 74 CUBIC INCHES (1,200 cc) and 82 CUBIC INCHES (1,345 ccm) SINCE LATE 1978
GENERATOR BOTTOM AND NOSE CONE STYLE ENGINES.
WILL WORK WITH DISTRIBUTOR

WILL NOT FIT WITH MAGNETO

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Finish:Select OneRaw SteelRaw Steel with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

Add Shovelhead Exhaust Flanges:Select An OptionFlange

 

CLICK HERE FOR A BIGGER PICTURE

CLICK HERE TO SEE TWISTED CHOPPERS SHOVELHEAD FLANGES

MADE FOR YOUR SHOVELHEAD STYLE ENGINE. CONSTRUCTED OF 16 GAUGE MILD STEEL TUBING AND ALL TIG WELDED. HAS A BOSS ON THE BACK SIDE FOR SECURE MOUNTING TO THE FRAME, ENGINE OR TRANSMISSION.

2 PIECE BOLT TOGETHER DESIGN

FITS 1966-85, 74 CUBIC INCHES (1,200 cc) and 82 CUBIC INCHES (1,345 ccm) SINCE LATE 1978
GENERATOR BOTTOM AND NOSE CONE STYLE ENGINES.
WILL WORK WITH DISTRIBUTOR

WILL NOT FIT WITH MAGNETO

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Finish:Select OneRaw SteelRaw Steel with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

Add Shovelhead Exhaust Flanges:Select An OptionFlange

 

CLICK HERE FOR A BIGGER PICTURE

CLICK HERE TO SEE TWISTED CHOPPERS FLANGE SET

TWISTED CHOPPERS SPORTY/BUELL HOOKAH HEADER IN CERAMIC SATIN BLACK COATING. 1.75" 16 GAUGE TUBES FROM THE HEAD INTO 1.875" 16 GAUGE AND THEN COMBINE INTO THE 3" 16 GAUGE SLASH CUT COLLECTOR. MOUNTING BOSS ON THE BACK SIDE OF THE COLLECTOR.

FITS ALL EVOLUTION 1986–PRESENT XL883, XL1100 AND XL1200 SPORSTER MODEL ENGINES AND BUELL, CYCLONE, LIGHTNING, THUNDERBOLT, XB(RUBBER-MOUNT) AND EARLIER MODEL SPORTSTER DERIVED ENGINES.

REQUIRES USE OF FACTORY EXHAUST FLANGES, CLIPS AND NUTS.
SO BE SURE TO ADD A CHROME FLANGE SET WHEN YOU ORDER.

WILL NOT WORK WITH THE FOLLOWING:

MID MOUNTED FOOT CONTROLS
FACTORY BUELL TUBE FRAMES.
SOME AIR CLEANER MODIFICATION MAY BE NEEDED FOR CLEARANCE

NOW YOU CAN GET YOUR TWISTED CHOPPERS EXHAUST WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP FOR ONLY $100

Select your choice from the drop down list below and click 'Check Price'.

Select Finish:Select OneSatin BlackSatin Black with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

Add Chrome Flange Set:Select An OptionFlange Set

 

CLICK HERE FOR A BIGGER PICTURE

CLICK HERE TO SEE TWISTED CHOPPERS FLANGE SET

FINISH. 1.75" 16 GAUGE TUBES FROM THE HEAD INTO 1.875" 16 GAUGE AND THEN COMBINE INTO THE 3" 16 GAUGE SLASH CUT COLLECTOR. MOUNTING BOSS ON THE BACK SIDE OF THE COLLECTOR.

FITS ALL EVOLUTION 1986–PRESENT XL883, XL1100 AND XL1200 SPORSTER MODEL ENGINES AND BUELL, CYCLONE, LIGHTNING, THUNDERBOLT, XB(RUBBER-MOUNT) AND EARLIER MODEL SPORTSTER DERIVED ENGINES.

REQUIRES USE OF FACTORY EXHAUST FLANGES, CLIPS AND NUTS.
SO BE SURE TO ADD A CHROME FLANGE SET WHEN YOU ORDER.

WILL NOT WORK WITH THE FOLLOWING:

MID MOUNTED FOOT CONTROLS
FACTORY BUELL TUBE FRAMES.
SOME AIR CLEANER MODIFICATION MAY BE NEEDED FOR CLEARANCE

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Finish:Select OneChromeChrome with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

Add Chrome Flange Set:Select An OptionFlange Set

 

CLICK HERE FOR A BIGGER PICTURE

CLICK HERE TO SEE TWISTED CHOPPERS FLANGE SET

TWISTED CHOPPERS SPORTY/BUELL HOOKAH 2 INTO 1 EXHAUST HEADER. 1.75" 16 GAUGE TUBES FROM THE HEAD INTO 1.875" 16 GAUGE AND THEN COMBINE INTO THE 3" 16 GAUGE SLASH CUT COLLECTOR. MOUNTING BOSS ON THE BACK SIDE OF THE COLLECTOR. THIS IS THE RAW STEEL VERSION.

FITS ALL EVOLUTION 1986–PRESENT XL883, XL1100 AND XL1200 SPORSTER MODEL ENGINES AND BUELL, CYCLONE, LIGHTNING, THUNDERBOLT, XB(RUBBER-MOUNT) AND EARLIER MODEL SPORTSTER DERIVED ENGINES.

REQUIRES USE OF FACTORY EXHAUST FLANGES, CLIPS AND NUTS.
SO BE SURE TO ADD A CHROME FLANGE SET WHEN YOU ORDER.

WILL NOT WORK WITH THE FOLLOWING:

MID MOUNTED FOOT CONTROLS
FACTORY BUELL TUBE FRAMES.
SOME AIR CLEANER MODIFICATION MAY BE NEEDED FOR CLEARANCE

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Finish:Select OneRaw SteelRaw Steel with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

Add Chrome Flange Set:Select An OptionChrome Flange

 

CLICK HERE FOR A BIGGER PICTURE

CLICK HERE TO SEE TWISTED CHOPPERS FLANGE SET

BASED OFF OUR HOOKAH STYLE HEADERS THESE ARE A ONE PIECE HEADER FOR YOUR SPORTSER/BUELL ENGINE. 1.75" 16 GAUGE TUBES FROM THE HEAD INTO 1.875" 16 GAUGE AND THEN INTO 1.75" 16 GAUGE SLASH CUT AND ANGLED TUBES. MOUNTING BOSS ON THE BACK SIDE OF THE LOWER PIPES.

2 PIECE BOLT TOGETHER DESIGN

FITS ALL EVOLUTION 1986–PRESENT XL883, XL1100 AND XL1200 SPORSTER MODEL ENGINES AND BUELL, CYCLONE, LIGHTNING, THUNDERBOLT, XB(RUBBER-MOUNT) AND EARLIER MODEL SPORTSTER DERIVED ENGINES.

REQUIRES USE OF FACTORY EXHAUST FLANGES, CLIPS AND NUTS.
SO BE SURE TO ADD A CHROME FLANGE SET WHEN YOU ORDER.

WILL NOT WORK WITH THE FOLLOWING:

MID MOUNTED FOOT CONTROLS
FACTORY BUELL TUBE FRAMES.
SOME AIR CLEANER MODIFICATION MAY BE NEEDED FOR CLEARANCE

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Finish:Select OneRaw SteelRaw Steel with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

Add Chrome Flange Set:Select An OptionChrome Flange

 

CLICK HERE FOR A BIGGER PICTURE

TWISTED CHOPPERS NOW HAVE THE HOOKAH HEADER AVAILABLE FOR YOUR XL IRONHEAD SPORTSTER ENGINE. CONSTRUCTED OF 16 GAUGE MILD STEEL TUBING AND FULLY TIG WELDED. HAS A BOSS ON THE BACK SIDE FOR SECURE MOUNTING TO THE FRAME, ENGINE OR TRANSMISSION

FITS KICKSTART AND ELECTRIC START MODELS
***MUST USE SHORTER HITACHI BRAND STARTER FOR REAR PIPE CLEARANCE***

XL IRONHEAD 1971-85 (1000 cc)

WILL NOT WORK WITH THE FOLLOWING:

PRESTOLITE STARTERS (LONGER)
MAGNETO EQUIPPED ENGINES
MID MOUNTED FOOT CONTROLS

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Finish:Select OneRaw SteelRaw Steel with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

 

CLICK HERE FOR A BIGGER PICTURE

TWISTED CHOPPERS NOW HAVE THE HOOKAH HEADER AVAILABLE FOR YOUR XL IRONHEAD SPORTSTER ENGINE. CONSTRUCTED OF 16 GAUGE MILD STEEL TUBING AND FULLY TIG WELDED. HAS A BOSS ON THE BACK SIDE FOR SECURE MOUNTING TO THE FRAME, ENGINE OR TRANSMISSION

***FITS ELECTRIC START MODELS ONLY***
WORKS WITH ALL STYLES OF STARTERS

XL IRONHEAD 1971-85 (1000 cc)

WILL NOT WORK WITH THE FOLLOWING:

SIDE MOUNTED "KIDNEY" OIL TANK
KICKSTART
MAGNETO EQUIPPED ENGINES
MID MOUNTED FOOT CONTROLS 

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Header:Select OneXL Ironhead Hookah HeaderXL Ironhead Hookah Header with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

 

TWISTED CHOPPERS NOW HAVE THE SLASH CUT HEADER AVAILABLE FOR YOUR XL IRONHEAD SPORTSTER ENGINE. CONSTRUCTED OF 16 GAUGE MILD STEEL TUBING AND FULLY TIG WELDED. HAS A BOSS ON THE BACK SIDE FOR SECURE MOUNTING TO THE FRAME, ENGINE OR TRANSMISSION

FITS KICKSTART AND ELECTRIC START MODELS
***MUST USE SHORTER HITACHI BRAND STARTER FOR REAR PIPE CLEARANCE***

XL IRONHEAD 1971-85 (1000 cc)

WILL NOT WORK WITH THE FOLLOWING:

PRESTOLITE STARTER(LONGER)
MAGNETO EQUIPPED ENGINES
MID MOUNTED FOOT CONTROLS 

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Header:Select OneXL Ironhead Hookah HeaderXL Ironhead Hookah Header with DEI Hi-Temp Silicone Coating & DEI Heat Wrap

 

CLICK HERE FOR A BIGGER PICTURE

WE NOW HAVE THE SLASHCUT HEADER AVAILABLE FOR YOUR XL IRONHEAD SPORTSTER ENGINE. CONSTRUCTED OF 16 GAUGE MILD STEEL TUBING AND FULLY TIG WELDED. HAS A BOSS ON THE BACK SIDE FOR SECURE MOUNTING TO THE FRAME, ENGINE OR TRANSMISSION

***FITS ELECTRIC START MODELS***
WORKS WITH ALL ELECTRIC STARTERS

XL IRONHEAD 1971-85 (1000 cc)

WILL NOT WORK WITH THE FOLLOWING:

SIDE MOUNTED "KIDNEY" OIL TANK
KICKSTART
MAGNETO EQUIPPED ENGINES
MID MOUNTED FOOT CONTROLS 

ALSO AVAILABLE WITH DEI HI-TEMP SILICONE COATING AND DEI HEAT WRAP!

Select your choice from the drop down list below and click 'Check Price'.

Select Header:Select OneXL Ironhead Hookah HeaderXL Ironhead Hookah Header with DEI Hi-Temp Silicone Coating & DEI Heat Wrap